diff options
Diffstat (limited to '.vim/bundle/vim-airline/doc')
| -rw-r--r-- | .vim/bundle/vim-airline/doc/airline.txt | 752 |
1 files changed, 0 insertions, 752 deletions
diff --git a/.vim/bundle/vim-airline/doc/airline.txt b/.vim/bundle/vim-airline/doc/airline.txt deleted file mode 100644 index 0ae928a..0000000 --- a/.vim/bundle/vim-airline/doc/airline.txt +++ /dev/null @@ -1,752 +0,0 @@ -*airline.txt* Lean and mean status/tabline that's light as air -*airline* - _ _ _ _ ~ - __ _(_)_ __ ___ __ _(_)_ __| (_)_ __ ___ ~ - \ \ / / | '_ ` _ \ _____ / _` | | '__| | | '_ \ / _ \ ~ - \ V /| | | | | | |_____| (_| | | | | | | | | | __/ ~ - \_/ |_|_| |_| |_| \__,_|_|_| |_|_|_| |_|\___| ~ - ~ -============================================================================== -CONTENTS *airline-contents* - - 01. Intro ............................................... |airline-intro| - 02. Features ......................................... |airline-features| - 03. Name ................................................. |airline-name| - 04. Configuration ............................... |airline-configuration| - 05. Commands ......................................... |airline-commands| - 06. Customization ............................... |airline-customization| - 07. Extensions ..................................... |airline-extensions| - 08. Advanced Customization ............. |airline-advanced-customization| - 09. Funcrefs ......................................... |airline-funcrefs| - 10. Pipeline ......................................... |airline-pipeline| - 11. Writing Extensions ..................... |airline-writing-extensions| - 12. Writing Themes ..................................... |airline-themes| - 13. Troubleshooting ........................... |airline-troubleshooting| - 14. Contributions ............................... |airline-contributions| - 15. License ........................................... |airline-license| - -============================================================================== -INTRODUCTION *airline-intro* - -vim-airline is a fast and lightweight alternative to powerline, written -in 100% vimscript with no outside dependencies. - -============================================================================== -FEATURES *airline-features* - -* tiny core written with extensibility in mind. -* integrates with many popular plugins. -* looks good with regular fonts, and provides configuration points so you - can use unicode or powerline symbols. -* optimized for speed; it loads in under a millisecond. -* fully customizable; if you know a little 'statusline' syntax you can - tweak it to your needs. -* extremely easy to write themes. - -============================================================================== -NAME *airline-name* - -Where did the name come from? - -I wrote this on an airplane, and since it's light as air it turned out to be a -good name :-) - -============================================================================== -CONFIGURATION *airline-configuration* - -There are a couple configuration values available (shown with their default -values): - -* the separator used on the left side > - let g:airline_left_sep='>' -< -* the separator used on the right side > - let g:airline_right_sep='<' -< -* enable modified detection > - let g:airline_detect_modified=1 - -* enable paste detection > - let g:airline_detect_paste=1 -< -* enable iminsert detection > - let g:airline_detect_iminsert=0 -< -* determine whether inactive windows should have the left section collapsed to - only the filename of that buffer. > - let g:airline_inactive_collapse=1 -< -* themes are automatically selected based on the matching colorscheme. this - can be overridden by defining a value. > - let g:airline_theme= -< -* if you want to patch the airline theme before it gets applied, you can - supply the name of a function where you can modify the palette. > - let g:airline_theme_patch_func = 'AirlineThemePatch' - function! AirlineThemePatch(palette) - if g:airline_theme == 'badwolf' - for colors in values(a:palette.inactive) - let colors[3] = 245 - endfor - endif - endfunction -< -* enable/disable automatic population of the `g:airline_symbols` dictionary - with powerline symbols. > - let g:airline_powerline_fonts=0 -< -* define the set of text to display for each mode. > - let g:airline_mode_map = {} " see source for the defaults - - " or copy paste the following into your vimrc for shortform text - let g:airline_mode_map = { - \ '__' : '-', - \ 'n' : 'N', - \ 'i' : 'I', - \ 'R' : 'R', - \ 'c' : 'C', - \ 'v' : 'V', - \ 'V' : 'V', - \ '' : 'V', - \ 's' : 'S', - \ 'S' : 'S', - \ '' : 'S', - \ } -< -* define the set of filename match queries which excludes a window from having - its statusline modified > - let g:airline_exclude_filenames = [] " see source for current list -< -* define the set of filetypes which are excluded from having its window - statusline modified > - let g:airline_exclude_filetypes = [] " see source for current list -< -* defines whether the preview window should be excluded from have its window - statusline modified (may help with plugins which use the preview window - heavily) > - let g:airline_exclude_preview = 0 -< -============================================================================== -COMMANDS *airline-commands* - -:AirlineTheme {theme-name} *:AirlineTheme* - Displays or changes the current theme. - -:AirlineToggleWhitespace *:AirlineToggleWhitespace* - Toggles whitespace detection. - -:AirlineToggle *:AirlineToggle* - Toggles between the standard 'statusline' and airline. - -:AirlineRefresh *:AirlineRefresh* - Refreshes all highlight groups. - -============================================================================== -CUSTOMIZATION *airline-customization* - -The following are some unicode symbols for customizing the left/right -separators, as well as the powerline font glyths. - -Note: You must define the dictionary first before setting values. Also, it's a -good idea to check whether if it exists as to avoid accidentally overwritting -its contents. > - if !exists('g:airline_symbols') - let g:airline_symbols = {} - endif - - " unicode symbols - let g:airline_left_sep = '»' - let g:airline_left_sep = '▶' - let g:airline_right_sep = '«' - let g:airline_right_sep = '◀' - let g:airline_symbols.linenr = '␊' - let g:airline_symbols.linenr = '' - let g:airline_symbols.linenr = '¶' - let g:airline_symbols.branch = '⎇' - let g:airline_symbols.paste = 'ρ' - let g:airline_symbols.paste = 'Þ' - let g:airline_symbols.paste = '∥' - let g:airline_symbols.whitespace = 'Ξ' - - " powerline symbols - let g:airline_left_sep = '' - let g:airline_left_alt_sep = '' - let g:airline_right_sep = '' - let g:airline_right_alt_sep = '' - let g:airline_symbols.branch = '' - let g:airline_symbols.readonly = '' - let g:airline_symbols.linenr = '' - - " old vim-powerline symbols - let g:airline_left_sep = '⮀' - let g:airline_left_alt_sep = '⮁' - let g:airline_right_sep = '⮂' - let g:airline_right_alt_sep = '⮃' - let g:airline_symbols.branch = '⭠' - let g:airline_symbols.readonly = '⭤' - let g:airline_symbols.linenr = '⭡' -< - -For more intricate customizations, you can replace the predefined sections -with the usual statusline syntax. - -Note: If you define any section variables it will replace the default values -entirely. If you want to disable only certain parts of a section you can try -using variables defined in the |airline-configuration| or |airline-extensions| -section. -> - variable names default contents - ---------------------------------------------------------------------------- - let g:airline_section_a (mode, paste, iminsert) - let g:airline_section_b (hunks, branch) - let g:airline_section_c (bufferline or filename) - let g:airline_section_gutter (readonly, csv) - let g:airline_section_x (tagbar, filetype, virtualenv) - let g:airline_section_y (fileencoding, fileformat) - let g:airline_section_z (percentage, line number, column number) - let g:airline_section_warning (syntastic, whitespace) - - " here is an example of how you could replace the branch indicator with - " the current working directory, followed by the filename. - let g:airline_section_b = '%{getcwd()}' - let g:airline_section_c = '%t' -< -============================================================================== -EXTENSIONS *airline-extensions* - -Most extensions are enabled by default and lazily loaded when the -corresponding plugin (if any) is detected. - -By default, airline will attempt to load any extension it can find in the -'runtimepath'. On some systems this can result in an undersirable startup -cost. You can disable the check with the following flag. > - let g:airline#extensions#disable_rtp_load = 1 -< - Note: Third party plugins that rely on this behavior will be affected. You - will need to manually load them. - -------------------------------------- *airline-default* -The default extension understands all of the `g:` variables in the -|airline-configuration| section, however it also has some more fine-tuned -configuration values that you can use. - -* control which sections get truncated and at what width. > - let g:airline#extensions#default#section_truncate_width = { - \ 'b': 79, - \ 'x': 60, - \ 'y': 88, - \ 'z': 45, - \ } - - " Note: set to an empty dictionary to disable truncation. - let g:airline#extensions#default#section_truncate_width = {} -< -* configure the layout of the sections by specificing an array of two arrays - (first array is the left side, second array is the right side). > - let g:airline#extensions#default#layout = [ - \ [ 'a', 'b', 'c' ], - \ [ 'x', 'y', 'z', 'warning' ] - \ ] -< -------------------------------------- *airline-quickfix* -The quickfix extension is a simple built-in extension which determines -whether the buffer is a quickfix or location list buffer, and adjusts the -title accordingly. - -* configure the title text for quickfix buffers > - let g:airline#extensions#quickfix#quickfix_text = 'Quickfix' -< -* configure the title text for location list buffers > - let g:airline#extensions#quickfix#location_text = 'Location' -< - -------------------------------------- *airline-bufferline* -vim-bufferline <https://github.com/bling/vim-bufferline> - -* enable/disable bufferline integration > - let g:airline#extensions#bufferline#enabled = 1 -< -* determine whether bufferline will overwrite customization variables > - let g:airline#extensions#bufferline#overwrite_variables = 1 -< -------------------------------------- *airline-branch* -fugitive.vim <https://github.com/tpope/vim-fugitive> -lawrencium <https://bitbucket.org/ludovicchabant/vim-lawrencium> -vcscommand <http://www.vim.org/scripts/script.php?script_id=90> - -* enable/disable fugitive/lawrencium integration > - let g:airline#extensions#branch#enabled = 1 -< -* change the text for when no branch is detected > - let g:airline#extensions#branch#empty_message = '' - -* use vcscommand.vim if available > - let g:airline#extensions#branch#use_vcscommand = 0 -< -------------------------------------- *airline-syntastic* -syntastic <https://github.com/scrooloose/syntastic> - -* enable/disable syntastic integration > - let g:airline#extensions#syntastic#enabled = 1 -< -------------------------------------- *airline-tagbar* -tagbar <https://github.com/majutsushi/tagbar> - -* enable/disable tagbar integration > - let g:airline#extensions#tagbar#enabled = 1 -< -* change how tags are displayed (:help tagbar-statusline) > - let g:airline#extensions#tagbar#flags = '' (default) - let g:airline#extensions#tagbar#flags = 'f' - let g:airline#extensions#tagbar#flags = 's' - let g:airline#extensions#tagbar#flags = 'p' -< -------------------------------------- *airline-csv* -csv.vim <https://github.com/chrisbra/csv.vim> - -* enable/disable csv integration for displaying the current column. > - let g:airline#extensions#csv#enabled = 1 -< -* change how columns are displayed. > - let g:airline#extensions#csv#column_display = 'Number' (default) - let g:airline#extensions#csv#column_display = 'Name' -< -------------------------------------- *airline-hunks* -vim-gitgutter <https://github.com/airblade/vim-gitgutter> -vim-signify <https://github.com/mhinz/vim-signify> - -* enable/disable showing a summary of changed hunks under source control. > - let g:airline#extensions#hunks#enabled = 1 -< -* enable/disable showing only non-zero hunks. > - let g:airline#extensions#hunks#non_zero_only = 0 -< -* set hunk count symbols. > - let g:airline#extensions#hunks#hunk_symbols = ['+', '~', '-'] -< -------------------------------------- *airline-ctrlp* -ctrlp <https://github.com/kien/ctrlp.vim> - -* configure which mode colors should ctrlp window use (takes effect - only if the active airline theme doesn't define ctrlp colors) > - let g:airline#extensions#ctrlp#color_template = 'insert' (default) - let g:airline#extensions#ctrlp#color_template = 'normal' - let g:airline#extensions#ctrlp#color_template = 'visual' - let g:airline#extensions#ctrlp#color_template = 'replace' -< - -* configure whether to show the previous and next modes (mru, buffer, etc...) -> - let g:airline#extensions#ctrlp#show_adjacent_modes = 1 -< -------------------------------------- *airline-virtualenv* -virtualenv <https://github.com/jmcantrell/vim-virtualenv> - -* enable/disable virtualenv integration > - let g:airline#extensions#virtualenv#enabled = 1 -< -------------------------------------- *airline-eclim* -eclim <https://eclim.org> - -* enable/disable eclim integration, which works well with the - |airline-syntastic| extension. > - let g:airline#extensions#eclim#enabled = 1 - -------------------------------------- *airline-whitespace* -* enable/disable detection of whitespace errors. > - let g:airline#extensions#whitespace#enabled = 1 -< -* customize the type of mixed indent checking to perform. > - " must be all spaces or all tabs before the first non-whitespace character - let g:airline#extensions#whitespace#mixed_indent_algo = 0 (default) - - " certain number of spaces are allowed after tabs, but not in between - " this algorithm works well for /** */ style comments in a tab-indented file - let g:airline#extensions#whitespace#mixed_indent_algo = 1 -< -* customize the whitespace symbol. > - let g:airline#extensions#whitespace#symbol = '!' -< -* configure which whitespace checks to enable. > - let g:airline#extensions#whitespace#checks = [ 'indent', 'trailing' ] -< -* configure the maximum number of lines where whitespace checking is enabled. > - let g:airline#extensions#whitespace#max_lines = 20000 -< -* configure whether a message should be displayed. > - let g:airline#extensions#whitespace#show_message = 1 -< -* configure the formatting of the warning messages. > - let g:airline#extensions#whitespace#trailing_format = 'trailing[%s]' - let g:airline#extensions#whitespace#mixed_indent_format = 'mixed-indent[%s]' -< -------------------------------------- *airline-tabline* -* enable/disable enhanced tabline. > - let g:airline#extensions#tabline#enabled = 0 -< -* enable/disable displaying buffers with a single tab. > - let g:airline#extensions#tabline#show_buffers = 1 -< -* configure filename match rules to exclude from the tabline. > - let g:airline#extensions#tabline#excludes = [] -< -* configure how numbers are calculated in tab mode. > - let g:airline#extensions#tabline#tab_nr_type = 0 " # of splits (default) - let g:airline#extensions#tabline#tab_nr_type = 1 " tab number -< -* enable/disable displaying tab number in tabs mode. > - let g:airline#extensions#tabline#show_tab_nr = 1 - -* enable/disable displaying tab type (far right) - let g:airline#extensions#tabline#show_tab_type = 1 - -* defines the name of a formatter for how buffer names are displayed. > - let g:airline#extensions#tabline#formatter = 'default' - - " here is how you can define a 'foo' formatter: - function! airline#extensions#tabline#foo#format(bufnr, buffers) - return fnamemodify(bufname(a:bufnr), ':t') - endfunction - let g:airline#extensions#tabline#formatter = 'foo' -< - Note: the following variables are only used by the 'default' formatter. - - * configure whether buffer numbers should be shown. > - let g:airline#extensions#tabline#buffer_nr_show = 0 -< - * configure how buffer numbers should be formatted with |printf|. > - let g:airline#extensions#tabline#buffer_nr_format = '%s: ' -< - * configure the formatting of filenames (see |filename-modifiers|). > - let g:airline#extensions#tabline#fnamemod = ':p:.' -< - * configure collapsing parent directories in buffer name. > - let g:airline#extensions#tabline#fnamecollapse = 1 - - " The `unique_tail` algorithm will display the tail of the filename, unless - " there is another file of the same name, in which it will display it along - " with the containing parent directory. - let g:airline#extensions#tabline#formatter = 'unique_tail' - - " The `unique_tail_improved` - another algorithm, that will smartly uniquify - " buffers names with similar filename, suppressing common parts of paths. - let g:airline#extensions#tabline#formatter = 'unique_tail_improved' -< -* configure the minimum number of buffers needed to show the tabline. > - let g:airline#extensions#tabline#buffer_min_count = 0 -< - Note: this setting only applies to a single tab and when `show_buffers` is - true. - -* configure the minimum number of tabs needed to show the tabline. > - let g:airline#extensions#tabline#tab_min_count = 0 -< - Note: this setting only applies when `show_buffers` is false. - -* configure separators for the tabline only. > - let g:airline#extensions#tabline#left_sep = '' - let g:airline#extensions#tabline#left_alt_sep = '' - let g:airline#extensions#tabline#right_sep = '' - let g:airline#extensions#tabline#right_alt_sep = '' - -* configure symbol used to represent close button - let g:airline#extensions#tabline#close_symbol = 'X' - -< -Note: Enabling this extension will modify 'showtabline' and 'guioptions'. - -------------------------------------- *airline-tmuxline* -tmuxline <https://github.com/edkolev/tmuxline.vim> - -* enable/disable tmuxline integration > - let g:airline#extensions#tmuxline#enabled = 0 -< -* configure which mode colors should be used in tmux statusline > - let airline#extensions#tmuxline#color_template = 'normal' (default) - let airline#extensions#tmuxline#color_template = 'insert' - let airline#extensions#tmuxline#color_template = 'visual' - let airline#extensions#tmuxline#color_template = 'replace' -< -* if specified, setting this option will trigger writing to the file whenever the - airline theme is applied, i.e. when :AirlineTheme is executed and on vim - startup > - airline#extensions#tmuxline#snapshot_file = "~/.tmux-statusline-colors.conf" -< -------------------------------------- *airline-promptline* -promptline <https://github.com/edkolev/promptline.vim> - -* configure the path to the snapshot .sh file. Mandatory option. The created - file should be sourced by the shell on login > - " in .vimrc - airline#extensions#promptline#snapshot_file = "~/.shell_prompt.sh" - - " in .bashrc/.zshrc - [ -f ~/.shell_prompt.sh ] && source ~/.shell_prompt.sh -< -* enable/disable promptline integration > - let g:airline#extensions#promptline#enabled = 0 -< -* configure which mode colors should be used in prompt > - let airline#extensions#promptline#color_template = 'normal' (default) - let airline#extensions#promptline#color_template = 'insert' - let airline#extensions#promptline#color_template = 'visual' - let airline#extensions#promptline#color_template = 'replace' -< -------------------------------------- *airline-nrrwrgn* -NrrwRgn <https://github.com/chrisbra/NrrwRgn> - -* enable/disable NrrwRgn integration > - let g:airline#extensions#nrrwrgn#enabled = 1 - -============================================================================== -ADVANCED CUSTOMIZATION *airline-advanced-customization* - -The defaults will accomodate the mass majority of users with minimal -configuration. However, if you want to reposition sections or contents you can -do so with built-in helper functions, which makes it possible to create -sections in a more declarative style. - -------------------------------------- *airline-parts* -A part is something that contains metadata that eventually gets rendered into -the statusline. You can define parts that contain constant strings or -functions. Defining parts is needed if you want to use features like automatic -insertion of separators or hiding based on window width. - -For example, this is how you would define a part function: > - call airline#parts#define_function('foo', 'GetFooText') -< -Here is how you would define a part that is visible only if the window width -greater than a minimum width. > - call airline#parts#define_minwidth('foo', 50) -< -Parts can be configured to be visible conditionally. > - call airline#parts#define_condition('foo', 'getcwd() =~ "work_dir"') -< -Note: Part definitions are combinative; e.g. the two examples above modify the -same `foo` part. - -Note: Look at the source code and tests for the full API. - -------------------------------------- *airline-predefined-parts* -Before is a list of parts that are predefined by vim-airline. - -* `mode` displays the current mode -* `iminsert` displays the current insert method -* `paste` displays the paste indicator -* `filetype` displays the file type -* `readonly` displays the read only indicator -* `file` displays the filename and modified indicator -* `ffenc` displays the file format and encoding - -And the following are defined for their respective extensions: - -`hunks`, `branch`, `tagbar`, `syntastic`, `whitespace` - -------------------------------------- *airline-accents* -Accents can be defined on any part, like so: > - call airline#parts#define_accent('foo', 'red') -< -This will override the colors of that part by using what is defined in that -particular accent. In the above example, the `red` accent is used, which means -regardless of which section the part is used in, it will have red foreground -colors instead of the section's default foreground color. - -The following accents are defined by default. Themes can define their variants -of the colors, but defaults will be provided if missing. > - bold, italic, red, green, blue, yellow, orange, purple -< -The defaults configure the mode and line number parts to be bold, and the -readonly part to be red. - -------------------------------------- *airline-sections* -Once a part is defined, you can use helper functions to generate the -statuslines for each section. For example, to use the part above, we could -define a section like this: > - function! AirlineInit() - let g:airline_section_a = airline#section#create(['mode', ' ', 'foo']) - let g:airline_section_b = airline#section#create_left(['ffenc','file']) - let g:airline_section_c = airline#section#create(['%{getcwd()}']) - endfunction - autocmd VimEnter * call AirlineInit() -< -This will create a section with the `mode`, followed by a space, and our `foo` -part in section `a`. Section `b` will have two parts with a left-side -separator. And section `c` will contain the current path. You may notice that -the space and cwd are not defined parts. For convenience, if a part of that -key does not exist, it will be inserted as is. The unit tests will be a good -resource for possibilities. - -Note: The use of |VimEnter| is important, because most extensions are lazily -loaded, so we must give them a chance to define their parts before we can use -them. - -Note: The `airline#section#create` function and friends will do its best to -create a section with the appropriate separators, but it only works for -function and text parts. Special 'statusline' items like %f or raw/undefined -parts will not work as it is not possible to inspect their widths/contents -before rendering to the statusline. - -============================================================================== -FUNCREFS *airline-funcrefs* - -vim-airline internally uses funcrefs to integrate with third party plugins, -and you can tap into this functionality to extend it for you needs. This is -the most powerful way to customize the statusline, and sometimes it may be -easier to go this route than the above methods. - -Every section can have two values. The default value is the global `g:` -variable which is used in the absense of a `w:` value. This makes it very easy -to override only certain parts of the statusline by only defining window-local -variables for a subset of all sections. - -------------------------------------- *add_statusline_func* -The following is an example of how you can extend vim-airline to support a -new plugin. > - function! MyPlugin(...) - if &filetype == 'MyPluginFileType' - let w:airline_section_a = 'MyPlugin' - let w:airline_section_b = '%f' - let w:airline_section_c = '%{MyPlugin#function()}' - let g:airline_variable_referenced_in_statusline = 'foo' - endif - endfunction - call airline#add_statusline_func('MyPlugin') -< -Notice that only the left side of the statusline is overwritten. This means -the right side (the line/column numbers, etc) will be intact. - -------------------------------------- *remove_statusline_func* -You can also remove a function as well, which is useful for when you want a -temporary override. > - call airline#remove_statusline_func('MyPlugin') -< - -============================================================================== -PIPELINE *airline-pipeline* - -Sometimes you want to do more than just use overrides. The statusline funcref -is invoked and passed two arguments. The first of these arguments is the -statusline builder. You can use this to build completely custom statuslines -to your liking. Here is an example: > -> - function! MyPlugin(...) - " first variable is the statusline builder - let builder = a:1 - - " WARNING: the API for the builder is not finalized and may change - call builder.add_section('Normal', '%f') - call builder.add_section('WarningMsg', '%{getcwd()}') - call builder.split() - call builder.add_section('airline_z', '%p%%') - - " tell the core to use the contents of the builder - return 1 - endfunction -< -The above example uses various example highlight groups to demonstrate -that you can use any combination from the loaded colorscheme. However, if -you want colors to change between modes, you should use one of the section -highlight groups, e.g. `airline_a` and `airline_b`. - -The second variable is the context, which is a dictionary containing various -values such as whether the statusline is active or not, and the window number. -> - context = { - 'winnr': 'the window number for the statusline', - 'active': 'whether the window is active or not', - 'bufnr': 'the current buffer for this window', - } -< -------------------------------------- *airline-pipeline-return-codes* -The pipeline accepts various return codes and can be used to determine the -next action. The following are the supported codes: > - 0 the default, continue on with the next funcref - -1 do not modify the statusline - 1 modify the statusline with the current contents of the builder -< -Note: Any value other than 0 will halt the pipeline and prevent the next -funcref from executing. - -============================================================================== -WRITING EXTENSIONS *airline-writing-extensions* - -For contributions into the plugin, here are the following guidelines: - -1. For simple 'filetype' checks, they can be added directly into the -`extensions.vim` file. - -2. Pretty much everything else should live as a separate file under the -`extensions/` directory. - - a. Inside `extensions.vim`, add a check for some variable or command that - is always available (these must be defined in `plugin/`, and _not_ - `autoload/` of the other plugin). If it exists, then initialize the - extension. This ensures that the extension is loaded if and only if the - user has the other plugin installed. Also, a check to - `airline#extensions#foo_plugin#enabled` should be performed to allow the - user to disable it. - - b. Configuration variables for the extension should reside in the - extension, e.g. `g:airline#extensions#foo_plugin#bar_variable`. - -See the source of |example.vim| for documented code of how to write one. -Looking at the other extensions is also a good resource. - -============================================================================== -WRITING THEMES *airline-themes* - -Themes are written "close to the metal" -- you will need to know some basic -VimL syntax to write a theme, but if you've written in any programming -language before it will be easy to pick up. - -The |dark.vim| theme fully documents this procedure and will guide you through -the process. The |jellybeans.vim| theme is another example of how to write a -theme, but instead of manually declaring colors, it extracts the values from -highlight groups. - -============================================================================== -TROUBLESHOOTING *airline-troubleshooting* - -Q. There are no colors. -A. You need to set up your terminal correctly. For more details, see - <http://vim.wikia.com/wiki/256_colors_in_vim>. Alternatively, if you want - to bypass the automatic detection of terminal colors, you can force Vim - into 256 color mode with this: > - set t_Co=256 -< -Q. The statusline does not appear until I create a split. -A. This is the default setting of 'laststatus'. If you want it to appear all - the time, add the following to your vimrc: > - set laststatus=2 -< -Q. Powerline symbols are not showing up. -A. First, you must install patched powerline fonts. Second, you must enable - unicode in vim. > - set encoding=utf-8 -< -Q. There is a pause when leaving insert mode. -A. Add the following to your vimrc. > - set ttimeoutlen=50 -< -Q. The colors look a little off for some themes. -A. Certain themes are derived from the active colorscheme by extracting colors - from predefined highlight groups. These airline themes will look good for - their intended matching colorschemes, but will be hit or miss when loaded - with other colorschemes. - - -Solutions to other common problems can be found in the Wiki: -<https://github.com/bling/vim-airline/wiki/FAQ> - -============================================================================== -CONTRIBUTIONS *airline-contributions* - -Contributions and pull requests are welcome. - -============================================================================== -LICENSE *airline-license* - -MIT License. Copyright © 2013-2014 Bailey Ling. - - - vim:tw=78:ts=8:ft=help:norl: |