Remove sublime conf

1 files changed, 0 insertions, 336 deletions

diff --git a/sublime/.config/sublime-text-2/Packages/Default/Preferences.sublime-settings b/sublime/.config/sublime-text-2/Packages/Default/Preferences.sublime-settings
deleted file mode 100644
index e71731c..0000000
--- a/sublime/.config/sublime-text-2/Packages/Default/Preferences.sublime-settings
+++ /dev/null
@@ -1,336 +0,0 @@
-// While you can edit this file, it's best to put your changes in
-// "User/Preferences.sublime-settings", which overrides the settings in here.
-//
-// Settings may also be placed in file type specific options files, for
-// example, in Packages/Python/Python.sublime-settings for python files.
-{
-    // Sets the colors used within the text area
-    "color_scheme": "Packages/Color Scheme - Default/Monokai.tmTheme",
-
-    // Note that the font_face and font_size are overriden in the platform
-    // specific settings file, for example, "Preferences (Linux).sublime-settings".
-    // Because of this, setting them here will have no effect: you must set them
-    // in your User File Preferences.
-    "font_face": "gohuFont",
-    "font_size": 11,
-
-    // Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",
-    // "subpixel_antialias", "no_round" (OS X only) and "directwrite" (Windows only)
-    "font_options": [],
-
-    // Characters that are considered to separate words
-    "word_separators": "./\\()\"'-:,.;<>~!@#$%^&*|+=[]{}`~?",
-
-    // Set to false to prevent line numbers being drawn in the gutter
-    "line_numbers": true,
-
-    // Set to false to hide the gutter altogether
-    "gutter": true,
-
-    // Spacing between the gutter and the text
-    "margin": 4,
-
-    // Fold buttons are the triangles shown in the gutter to fold regions of text
-    "fold_buttons": true,
-
-    // Hides the fold buttons unless the mouse is over the gutter
-    "fade_fold_buttons": true,
-
-    // Columns in which to display vertical rulers
-    "rulers": [],
-
-    // Set to true to turn spell checking on by default
-    "spell_check": false,
-
-    // The number of spaces a tab is considered equal to
-    "tab_size": 4,
-
-    // Set to true to insert spaces when tab is pressed
-    "translate_tabs_to_spaces": false,
-
-    // If translate_tabs_to_spaces is true, use_tab_stops will make tab and
-    // backspace insert/delete up to the next tabstop
-    "use_tab_stops": true,
-
-    // Set to false to disable detection of tabs vs. spaces on load
-    "detect_indentation": true,
-
-    // Calculates indentation automatically when pressing enter
-    "auto_indent": true,
-
-    // Makes auto indent a little smarter, e.g., by indenting the next line
-    // after an if statement in C. Requires auto_indent to be enabled.
-    "smart_indent": true,
-
-    // Adds whitespace up to the first open bracket when indenting. Requires
-    // auto_indent to be enabled.
-    "indent_to_bracket": false,
-
-    // Trims white space added by auto_indent when moving the caret off the
-    // line.
-    "trim_automatic_white_space": true,
-
-    // Disables horizontal scrolling if enabled.
-    // May be set to true, false, or "auto", where it will be disabled for
-    // source code, and otherwise enabled.
-    "word_wrap": false,
-
-    // Set to a value other than 0 to force wrapping at that column rather than the
-    // window width
-    "wrap_width": 0,
-
-    // Set to false to prevent word wrapped lines from being indented to the same
-    // level
-    "indent_subsequent_lines": true,
-
-    // Draws text centered in the window rather than left aligned
-    "draw_centered": false,
-
-    // Controls auto pairing of quotes, brackets etc
-    "auto_match_enabled": true,
-
-    // Word list to use for spell checking
-    "dictionary": "Packages/Language - English/en_US.dic",
-
-    // Set to true to draw a border around the visible rectangle on the minimap.
-    // The color of the border will be determined by the "minimapBorder" key in
-    // the color scheme
-    "draw_minimap_border": false,
-
-    // If enabled, will highlight any line with a caret
-    "highlight_line": false,
-
-    // Valid values are "smooth", "phase", "blink", "wide" and "solid".
-    "caret_style": "smooth",
-
-    // Set to false to disable underlining the brackets surrounding the caret
-    "match_brackets": true,
-
-    // Set to false if you'd rather only highlight the brackets when the caret is
-    // next to one
-    "match_brackets_content": true,
-
-    // Set to false to not highlight square brackets. This only takes effect if
-    // match_brackets is true
-    "match_brackets_square": true,
-
-    // Set to false to not highlight curly brackets. This only takes effect if
-    // match_brackets is true
-    "match_brackets_braces": true,
-
-    // Set to false to not highlight angle brackets. This only takes effect if
-    // match_brackets is true
-    "match_brackets_angle": false,
-
-    // Enable visualization of the matching tag in HTML and XML
-    "match_tags": true,
-
-    // Highlights other occurrences of the currently selected text
-    "match_selection": true,
-
-    // Additional spacing at the top of each line, in pixels
-    "line_padding_top": 0,
-
-    // Additional spacing at the bottom of each line, in pixels
-    "line_padding_bottom": 0,
-
-    // Set to false to disable scrolling past the end of the buffer.
-    // On OS X, this value is overridden in the platform specific settings, so
-    // you'll need to place this line in your user settings to override it.
-    "scroll_past_end": true,
-
-    // This controls what happens when pressing up or down when on the first
-    // or last line.
-    // On OS X, this value is overridden in the platform specific settings, so
-    // you'll need to place this line in your user settings to override it.
-    "move_to_limit_on_up_down": false,
-
-    // Set to "none" to turn off drawing white space, "selection" to draw only the
-    // white space within the selection, and "all" to draw all white space
-    "draw_white_space": "selection",
-
-    // Set to false to turn off the indentation guides.
-    // The color and width of the indent guides may be customized by editing
-    // the corresponding .tmTheme file, and specifying the colors "guide",
-    // "activeGuide" and "stackGuide"
-    "draw_indent_guides": true,
-
-    // Controls how the indent guides are drawn, valid options are
-    // "draw_normal" and "draw_active". draw_active will draw the indent
-    // guides containing the caret in a different color.
-    "indent_guide_options": ["draw_normal"],
-
-    // Set to true to removing trailing white space on save
-    "trim_trailing_white_space_on_save": false,
-
-    // Set to true to ensure the last line of the file ends in a newline
-    // character when saving
-    "ensure_newline_at_eof_on_save": false,
-
-    // Set to true to automatically save files when switching to a different file
-    // or application
-    "save_on_focus_lost": false,
-
-    // The encoding to use when the encoding can't be determined automatically.
-    // ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
-    "fallback_encoding": "Western (Windows 1252)",
-
-    // Encoding used when saving new files, and files opened with an undefined
-    // encoding (e.g., plain ascii files). If a file is opened with a specific
-    // encoding (either detected or given explicitly), this setting will be
-    // ignored, and the file will be saved with the encoding it was opened
-    // with.
-    "default_encoding": "UTF-8",
-
-    // Files containing null bytes are opened as hexadecimal by default
-    "enable_hexadecimal_encoding": true,
-
-    // Determines what character(s) are used to terminate each line in new files.
-    // Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
-    // 'unix' (LF only).
-    "default_line_ending": "system",
-
-    // When enabled, pressing tab will insert the best matching completion.
-    // When disabled, tab will only trigger snippets or insert a tab.
-    // Shift+tab can be used to insert an explicit tab when tab_completion is
-    // enabled.
-    "tab_completion": true,
-
-    // Enable auto complete to be triggered automatically when typing.
-    "auto_complete": true,
-
-    // The maximum file size where auto complete will be automatically triggered.
-    "auto_complete_size_limit": 4194304,
-
-    // The delay, in ms, before the auto complete window is shown after typing
-    "auto_complete_delay": 50,
-
-    // Controls what scopes auto complete will be triggered in
-    "auto_complete_selector": "source - comment",
-
-    // Additional situations to trigger auto complete
-    "auto_complete_triggers": [ {"selector": "text.html", "characters": "<"} ],
-
-    // By default, auto complete will commit the current completion on enter.
-    // This setting can be used to make it complete on tab instead.
-    // Completing on tab is generally a superior option, as it removes
-    // ambiguity between committing the completion and inserting a newline.
-    "auto_complete_commit_on_tab": false,
-
-    // Controls if auto complete is shown when snippet fields are active.
-    // Only relevant if auto_complete_commit_on_tab is true.
-    "auto_complete_with_fields": false,
-
-    // By default, shift+tab will only unindent if the selection spans
-    // multiple lines. When pressing shift+tab at other times, it'll insert a
-    // tab character - this allows tabs to be inserted when tab_completion is
-    // enabled. Set this to true to make shift+tab always unindent, instead of
-    // inserting tabs.
-    "shift_tab_unindent": false,
-
-    // If true, the copy and cut commands will operate on the current line
-    // when the selection is empty, rather than doing nothing.
-    "copy_with_empty_selection": true,
-
-    // If true, the selected text will be copied into the find panel when it's
-    // shown.
-    // On OS X, this value is overridden in the platform specific settings, so
-    // you'll need to place this line in your user settings to override it.
-    "find_selected_text": true,
-
-    // When drag_text is enabled, clicking on selected text will begin a
-    // drag-drop operation
-    "drag_text": true,
-
-    //
-    // User Interface Settings
-    //
-
-    // The theme controls the look of Sublime Text's UI (buttons, tabs, scroll bars, etc)
-    "theme": "Default.sublime-theme",
-
-    // Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
-    // scroll slower, or set to larger than 1 to scroll faster
-    "scroll_speed": 1.0,
-
-    // Controls side bar animation when expanding or collapsing folders
-    "tree_animation_enabled": true,
-
-    // Makes tabs with modified files more visible
-    "highlight_modified_tabs": false,
-
-    "show_tab_close_buttons": true,
-
-    // Show folders in the side bar in bold
-    "bold_folder_labels": false,
-
-    // OS X 10.7 only: Set to true to disable Lion style full screen support.
-    // Sublime Text must be restarted for this to take effect.
-    "use_simple_full_screen": false,
-
-    // OS X only. Valid values are true, false, and "auto". Auto will enable
-    // the setting when running on a screen 2880 pixels or wider (i.e., a
-    // Retina display). When this setting is enabled, OpenGL is used to
-    // accelerate drawing. Sublime Text must be restarted for changes to take
-    // effect.
-    "gpu_window_buffer": "auto",
-
-    // Valid values are "system", "enabled" and "disabled"
-    "overlay_scroll_bars": "system",
-
-    //
-    // Application Behavior Settings
-    //
-
-    // Exiting the application with hot_exit enabled will cause it to close
-    // immediately without prompting. Unsaved modifications and open files will
-    // be preserved and restored when next starting.
-    //
-    // Closing a window with an associated project will also close the window
-    // without prompting, preserving unsaved changes in the workspace file
-    // alongside the project.
-    "hot_exit": true,
-
-    // remember_open_files makes the application start up with the last set of
-    // open files. Changing this to false will have no effect if hot_exit is
-    // true
-    "remember_open_files": true,
-
-    // OS X only: When files are opened from finder, or by dragging onto the
-    // dock icon, this controls if a new window is created or not.
-    "open_files_in_new_window": true,
-
-    // OS X only: This controls if an empty window is created at startup or not.
-    "create_window_at_startup": true,
-
-    // Set to true to close windows as soon as the last file is closed, unless
-    // there's a folder open within the window. This is always enabled on OS X,
-    // changing it here won't modify the behavior.
-    "close_windows_when_empty": false,
-
-    // Show the full path to files in the title bar.
-    // On OS X, this value is overridden in the platform specific settings, so
-    // you'll need to place this line in your user settings to override it.
-    "show_full_path": true,
-
-    // Shows the Build Results panel when building. If set to false, the Build
-    // Results can be shown via the Tools/Build Results menu.
-    "show_panel_on_build": true,
-
-    // Preview file contents when clicking on a file in the side bar. Double
-    // clicking or editing the preview will open the file and assign it a tab.
-    "preview_on_click": true,
-
-    // folder_exclude_patterns and file_exclude_patterns control which files
-    // are listed in folders on the side bar. These can also be set on a per-
-    // project basis.
-    "folder_exclude_patterns": [".svn", ".git", ".hg", "CVS"],
-    "file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],
-    // These files will still show up in the side bar, but won't be included in
-    // Goto Anything or Find in Files
-    "binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],
-
-    // List any packages to ignore here. When removing entries from this list,
-    // a restart may be required if the package contains plugins.
-    "ignored_packages": ["Vintage"]
-}