updated repo to manage dotfiles via gnu stow, the symlink farm manager. happy birthday commit! :birthday: :sparkles:

1 files changed, 0 insertions, 319 deletions

diff --git a/.vim/bundle/vim-fugitive/doc/fugitive.txt b/.vim/bundle/vim-fugitive/doc/fugitive.txt
deleted file mode 100644
index 5870837..0000000
--- a/.vim/bundle/vim-fugitive/doc/fugitive.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-*fugitive.txt*  A Git wrapper so awesome, it should be illegal
-
-Author:  Tim Pope <http://tpo.pe/>
-License: Same terms as Vim itself (see |license|)
-
-This plugin is only available if 'compatible' is not set.
-
-INTRODUCTION                                    *fugitive*
-
-Whenever you edit a file from a Git repository, a set of commands is defined
-that serve as a gateway to Git.
-
-COMMANDS                                        *fugitive-commands*
-
-These commands are local to the buffers in which they work (generally, buffers
-that are part of Git repositories).
-
-                                                *fugitive-:Git*
-:Git [args]             Run an arbitrary git command. Similar to :!git [args]
-                        but chdir to the repository tree first.
-
-                                                *fugitive-:Git!*
-:Git! [args]            Like |:Git|, but capture the output into a temp file,
-                        and edit that temp file.
-
-                                                *fugitive-:Gcd*
-:Gcd [directory]        |:cd| relative to the repository.
-
-                                                *fugitive-:Glcd*
-:Glcd [directory]       |:lcd| relative to the repository.
-
-                                                *fugitive-:Gstatus*
-:Gstatus                Bring up the output of git-status in the preview
-                        window.  The following maps, which work on the cursor
-                        line file where sensible, are provided:
-
-                        g?    show this help
-                        <C-N> next file
-                        <C-P> previous file
-                        <CR>  |:Gedit|
-                        -     |:Git| add
-                        -     |:Git| reset (staged files)
-                        cA    |:Gcommit| --amend --reuse-message=HEAD
-                        ca    |:Gcommit| --amend
-                        cc    |:Gcommit|
-                        cva   |:Gcommit| --amend --verbose
-                        cvc   |:Gcommit| --verbose
-                        D     |:Gdiff|
-                        ds    |:Gsdiff|
-                        dp    |:Git!| diff (p for patch; use :Gw to apply)
-                        dp    |:Git| add --intent-to-add (untracked files)
-                        dv    |:Gvdiff|
-                        O     |:Gtabedit|
-                        o     |:Gsplit|
-                        p     |:Git| add --patch
-                        p     |:Git| reset --patch (staged files)
-                        q     close status
-                        R     reload status
-                        S     |:Gvsplit|
-
-                                                *fugitive-:Gcommit*
-:Gcommit [args]         A wrapper around git-commit.  If there is nothing
-                        to commit, |:Gstatus| is called instead.  Unless the
-                        arguments given would skip the invocation of an editor
-                        (e.g., -m), a split window will be used to obtain a
-                        commit message.  Write and close that window (:wq or
-                        |:Gwrite|) to finish the commit.  Unlike when running
-                        the actual git-commit command, it is possible (but
-                        unadvisable) to muck with the index with commands like
-                        git-add and git-reset while a commit message is
-                        pending.
-
-                                                *fugitive-:Ggrep*
-:Ggrep [args]           |:grep| with git-grep as 'grepprg'.
-
-                                                *fugitive-:Glgrep*
-:Glgrep [args]          |:lgrep| with git-grep as 'grepprg'.
-
-                                                *fugitive-:Glog*
-:Glog [args]            Load all previous revisions of the current file into
-                        the quickfix list.  Additional git-log arguments can
-                        be given (for example, --reverse).  If "--" appears as
-                        an argument, no file specific filtering is done, and
-                        previous commits rather than previous file revisions
-                        are loaded.
-
-                                                *fugitive-:Gllog*
-:Gllog [args]           Like |:Glog|, but use the location list instead of the
-                        quickfix list.
-
-                                        *fugitive-:Gedit* *fugitive-:Ge*
-:Gedit [revision]       |:edit| a |fugitive-revision|.
-
-                                                *fugitive-:Gsplit*
-:Gsplit [revision]      |:split| a |fugitive-revision|.
-
-                                                *fugitive-:Gvsplit*
-:Gvsplit [revision]     |:vsplit| a |fugitive-revision|.
-
-                                                *fugitive-:Gtabedit*
-:Gtabedit [revision]    |:tabedit| a |fugitive-revision|.
-
-                                                *fugitive-:Gpedit*
-:Gpedit [revision]      |:pedit| a |fugitive-revision|.
-
-:Gsplit! [args]                 *fugitive-:Gsplit!* *fugitive-:Gvsplit!*
-:Gvsplit! [args]                *fugitive-:Gtabedit!* *fugitive-:Gpedit!*
-:Gtabedit! [args]       Like |:Git!|, but open the resulting temp file in a
-:Gpedit! [args]         split, tab, or preview window.
-
-                                                *fugitive-:Gread*
-:Gread [revision]       Empty the buffer and |:read| a |fugitive-revision|.
-                        When the argument is omitted, this is similar to
-                        git-checkout on a work tree file or git-add on a stage
-                        file, but without writing anything to disk.
-
-:{range}Gread [revision]
-                        |:read| in a |fugitive-revision| after {range}.
-
-                                                *fugitive-:Gread!*
-:Gread! [args]          Empty the buffer and |:read| the output of a Git
-                        command.  For example, :Gread! show HEAD:%.
-
-:{range}Gread! [args]  |:read| the output of a Git command after {range}.
-
-                                        *fugitive-:Gw* *fugitive-:Gwrite*
-:Gwrite                 Write to the current file's path and stage the results.
-                        When run in a work tree file, it is effectively git
-                        add.  Elsewhere, it is effectively git-checkout.  A
-                        great deal of effort is expended to behave sensibly
-                        when the work tree or index version of the file is
-                        open in another buffer.
-
-:Gwrite {path}          You can give |:Gwrite| an explicit path of where in
-                        the work tree to write.  You can also give a path like
-                        :0:foo.txt or even :0 to write to just that stage in
-                        the index.
-
-                                                *fugitive-:Gwq*
-:Gwq [path]             Like |:Gwrite| followed by |:quit| if the write
-                        succeeded.
-
-:Gwq! [path]            Like |:Gwrite|! followed by |:quit|! if the write
-                        succeeded.
-
-                                                *fugitive-:Gdiff*
-:Gdiff [revision]       Perform a |vimdiff| against the current file in the
-                        given revision.  With no argument, the version in the
-                        index is used (which means a three-way diff during a
-                        merge conflict, making it a git-mergetool
-                        alternative).  The newer of the two files is placed
-                        to the right.  Use |do| and |dp| and write to the
-                        index file to simulate "git add --patch".
-
-                                                *fugitive-:Gsdiff*
-:Gsdiff [revision]      Like |:Gdiff|, but split horizontally.
-
-                                                *fugitive-:Gvdiff*
-:Gvdiff [revision]      Identical to |:Gdiff|.  For symmetry with |:Gsdiff|.
-
-                                                *fugitive-:Gmove*
-:Gmove {destination}    Wrapper around git-mv that renames the buffer
-                        afterward.  The destination is relative to the current
-                        directory except when started with a /, in which case
-                        it is relative to the work tree.  Add a ! to pass -f.
-
-                                                *fugitive-:Gremove*
-:Gremove                Wrapper around git-rm that deletes the buffer
-                        afterward.  When invoked in an index file, --cached is
-                        passed.  Add a ! to pass -f and forcefully discard the
-                        buffer.
-
-                                                *fugitive-:Gblame*
-:Gblame [flags]         Run git-blame on the file and open the results in a
-                        scroll bound vertical split.  Press enter on a line to
-                        reblame the file as it was in that commit.  You can
-                        give any of ltfnsewMC as flags and they will be passed
-                        along to git-blame.  The following maps, which work on
-                        the cursor line commit where sensible, are provided:
-
-                        g?    show this help
-                        A     resize to end of author column
-                        C     resize to end of commit column
-                        D     resize to end of date/time column
-                        q     close blame and return to blamed window
-                        gq    q, then |:Gedit| to return to work tree version
-                        <CR>  q, then open commit
-                        o     open commit in horizontal split
-                        O     open commit in new tab
-                        -     reblame at commit
-                        ~     reblame at [count]th first grandparent
-                        P     reblame at [count]th parent (like HEAD^[count])
-
-:[range]Gblame [flags]  Run git-blame on the given range.
-
-                                                *fugitive-:Gbrowse*
-:[range]Gbrowse         If the remote for the current branch is on GitHub,
-                        open the current file, blob, tree, commit, or tag
-                        (with git-web--browse) on GitHub.  Otherwise, open the
-                        current file, blob, tree, commit, or tag in
-                        git-instaweb (if you have issues, verify you can run
-                        "git instaweb" from a terminal).  If a range is given,
-                        it is appropriately appended to the URL as an anchor.
-
-                        To use with GitHub FI, point g:fugitive_github_domains
-                        at a list of domains:
->
-                        let g:fugitive_github_domains = ['https://example.com']
-~
-:[range]Gbrowse!        Like :Gbrowse, but put the URL on the clipboard rather
-                        than opening it.
-
-:[range]Gbrowse {revision}
-                        Like :Gbrowse, but for a given |fugitive-revision|.  A
-                        useful value here is -, which ties the URL to the
-                        latest commit rather than a volatile branch.
-
-:[range]Gbrowse [...]@{remote}
-                        Force using the given remote rather than the remote
-                        for the current branch.  The remote is used to
-                        determine which GitHub repository to link to.
-
-MAPPINGS                                        *fugitive-mappings*
-
-These maps are available everywhere.
-
-                                                *fugitive-c_CTRL-R_CTRL-G*
-<C-R><C-G>              On the command line, recall the path to the current
-                        object (that is, a representation of the object
-                        recognized by |:Gedit|).
-
-                                                *fugitive-y_CTRL-G*
-["x]y<C-G>              Yank the commit SHA and path to the current object.
-
-These maps are available in Git objects.
-
-                                                *fugitive-<CR>*
-<CR>                    Jump to the revision under the cursor.
-
-                                                *fugitive-o*
-o                       Jump to the revision under the cursor in a new split.
-
-                                                *fugitive-S*
-S                       Jump to the revision under the cursor in a new
-                        vertical split.
-
-                                                *fugitive-O*
-O                       Jump to the revision under the cursor in a new tab.
-
-                                                *fugitive--*
--                       Go to the tree containing the current tree or blob.
-
-                                                *fugitive-~*
-~                       Go to the current file in the [count]th first
-                        ancestor.
-
-                                                *fugitive-P*
-P                       Go to the current file in the [count]th parent.
-
-                                                *fugitive-C*
-C                       Go to the commit containing the current file.
-
-                                                *fugitive-.*
-.                       Start a |:| command line with the current revision
-                        prepopulated at the end of the line.
-
-                                                *fugitive-a*
-a                       Show the current tag, commit, or tree in an alternate
-                        format.
-
-SPECIFYING REVISIONS                            *fugitive-revision*
-
-Fugitive revisions are similar to Git revisions as defined in the "SPECIFYING
-REVISIONS" section in the git-rev-parse man page.  For commands that accept an
-optional revision, the default is the file in the index for work tree files
-and the work tree file for everything else.  Example revisions follow.
-
-Revision        Meaning ~
-HEAD            .git/HEAD
-master          .git/refs/heads/master
-HEAD^{}         The commit referenced by HEAD
-HEAD^           The parent of the commit referenced by HEAD
-HEAD:           The tree referenced by HEAD
-/HEAD           The file named HEAD in the work tree
-Makefile        The file named Makefile in the work tree
-HEAD^:Makefile  The file named Makefile in the parent of HEAD
-:Makefile       The file named Makefile in the index (writable)
--               The current file in HEAD
-^               The current file in the previous commit
-~3              The current file 3 commits ago
-:               .git/index (Same as |:Gstatus|)
-:0              The current file in the index
-:1              The current file's common ancestor during a conflict
-:2              The current file in the target branch during a conflict
-:3              The current file in the merged branch during a conflict
-:/foo           The most recent commit with "foo" in the message
-
-STATUSLINE                                      *fugitive-statusline*
-
-                                                *fugitive#statusline()*
-Add %{fugitive#statusline()} to your statusline to get an indicator including
-the current branch and the currently edited file's commit.  If you don't have
-a statusline, this one matches the default when 'ruler' is set:
->
-    set statusline=%<%f\ %h%m%r%{fugitive#statusline()}%=%-14.(%l,%c%V%)\ %P
-<
-                                                *fugitive#head(...)*
-Use fugitive#head() to return the name of the current branch. If the current
-HEAD is detached, fugitive#head() will return the empty string, unless the
-optional argument is given, in which case the hash of the current commit will
-be truncated to the given number of characters.
-
-ABOUT                                           *fugitive-about*
-
-Grab the latest version or report a bug on GitHub:
-
-http://github.com/tpope/vim-fugitive
-
- vim:tw=78:et:ft=help:norl: