Mouve i3 / i3pystatus conf

1 files changed, 0 insertions, 150 deletions

diff --git a/i3pystatus/conf.py b/i3pystatus/conf.py
deleted file mode 100644
index 6f29414..0000000
--- a/i3pystatus/conf.py
+++ /dev/null
@@ -1,150 +0,0 @@
-import logging
-from i3pystatus import Status
-
-status = Status(logfile='/home/neodarz/i3pystatus.log')
-
-status.register("text",
-        text=" ░▒▓█",)
-
-status.register("keyboard_locks",
-	format="{caps} {num}",
-        hints = {"separator": False, "separator_block_width": 0},
-	caps_off="",
-	num_off="",)
-
-status.register("text",
-        text=" ░▒▓█▓▒░ ",
-        hints = {"separator": False, "separator_block_width": 0},)
-
-# Displays clock like this:
-# Tue 30 Jul 11:59:46 PM KW31
-#                          ^-- calendar week
-status.register("clock",
-    format=" %a %-d %b   %X",
-    hints = {"separator": False, "separator_block_width": 0},)
-
-status.register("text",
-        text=" ░▒▓█▓▒░ ",
-        hints = {"separator": False, "separator_block_width": 0},)
-
-
-
-# Shows the average load of the last minute and the last 5 minutes
-# (the default value for format is used)
-#status.register("load")
-
-# Shows your CPU temperature, if you have a Intel CPU
-#status.register("temp",
- #   format=" {temp:.0f}°C",)
-
-# The battery monitor has many formatting options, see README for details
-
-# This would look like this, when discharging (or charging)
-# ↓14.22W 56.15% [77.81%] 2h:41m
-# And like this if full:
-# =14.22W 100.0% [91.21%]
-#
-# This would also display a desktop notification (via D-Bus) if the percentage
-# goes below 5 percent while discharging. The block will also color RED.
-# If you don't have a desktop notification demon yet, take a look at dunst:
-#   http://www.knopwob.org/dunst/
-#status.register("battery",
-#    format="{status} {percentage:.2f}% [{percentage_design:.2f}%] {remaining:%E%hh:%Mm}",
-#    alert=True,
-#    alert_percentage=5,
-#    status={
-#        "DIS": "↓",
-#        "CHR": "↑",
-#        "FULL": "=",
-#    },)
-
-
-# Displays whether a DHCP client is running
-#status.register("runwatch",
-#    name="DHCP",
-#    path="/var/run/dhclient*.pid",)
-
-
-# Shows the address and up/down state of eth0. If it is up the address is shown in
-# green (the default value of color_up) and the CIDR-address is shown
-# (i.e. 10.10.10.42/24).
-# If it's down just the interface name (eth0) will be displayed in red
-# (defaults of format_down and color_down)
-#
-# Note: the network module requires PyPI package netifaces
-status.register("network",
-        dynamic_color=True,
-        start_color="#138491",
-        color_down="#138491",
-        end_color="#138491",
-    interface="enp3s0",
-    format_up="<span color=\"#138491\"> {v4cidr}</span>",
-	format_down="<span color=\"#138491\"></span>",
-        hints = {"markup": "pango", "separator": False, "separator_block_width": 0},)
-
-status.register("text",
-        text=" ░▒▓█▓▒░ ",
-        hints = {"separator": False, "separator_block_width": 0},)
-
-# Note: requires both netifaces and basiciw (for essid and quality)
-#status.register("network",
-#    interface="wlp2s0",
-#    format_up=" {essid}  {quality:03.0f}%",
-#	format_down="")
-
-# Shows disk usage of /
-# Format:
-# 42/128G [86G]
-status.register("disk",
-    path="/",
-    format="  {avail}G",
-    hints = {"separator": False, "separator_block_width": 0},)
-
-status.register("text",
-        text=" ░▒▓█▓▒░ ",
-        hints = {"separator": False, "separator_block_width": 0},)
-
-# Shows pulseaudio default sink volume
-#
-# Note: requires libpulseaudio from PyPI
-status.register("pulseaudio",
-    format="{volume}",format_muted="",
-    hints = {"separator": False, "separator_block_width": 0},)
-
-status.register("text",
-        text=" █▓▒░ ",
-        hints = {"separator": False, "separator_block_width": 0},)
-
-#status.register("backlight",
-#	format="{brightness}",)
-
-#status.register("shell",
-#	command="~/.i3-blocks/blocks/brightness",)
-
-# Shows mpd status
-# Format:
-# Cloud connected▶Reroute to Remain
-status.register("cmus",
-    format="{status} {song_elapsed}/{song_length} {artist} - {title}",
-    status={
-        "stopped": "◾",
-        "playing": "▶",
-        "paused": "▷",
-    },format_not_running="",
-    hints = {"separator": False, "separator_block_width": 0},)
-
-
-status.register("now_playing",
-    player="clementine",
-    color="#ffc080",
-    hints = {"separator": False, "separator_block_width": 0},
-	format='{status} {artist} - {title} {song_elapsed}/{song_length}',
-#	status = {
- #         "Playing": "plsay",
-  #        "Paused": "pause",
-  #        "Stopped": "stop",
-  #   }
-)
-
-status.run()
-