1 files changed, 102 insertions, 0 deletions
diff --git a/i3pystatus/conf.py b/i3pystatus/conf.py
new file mode 100644
index 0000000..b7d55c0
--- /dev/null
+++ b/i3pystatus/conf.py
@@ -0,0 +1,102 @@
+import logging
+from i3pystatus import Status
+
+status = Status(logfile='/home/neodarz/i3pystatus.log')
+
+status.register("keyboard_locks",
+	color="#008000",
+	format="{caps} {num}",
+	caps_off="",
+	num_off="",)
+
+# Displays clock like this:
+# Tue 30 Jul 11:59:46 PM KW31
+#                          ^-- calendar week
+status.register("clock",
+    format=" %a %-d %b   %X",)
+
+# Shows the average load of the last minute and the last 5 minutes
+# (the default value for format is used)
+#status.register("load")
+
+# Shows your CPU temperature, if you have a Intel CPU
+status.register("temp",
+    format=" {temp:.0f}°C",)
+
+# The battery monitor has many formatting options, see README for details
+
+# This would look like this, when discharging (or charging)
+# ↓14.22W 56.15% [77.81%] 2h:41m
+# And like this if full:
+# =14.22W 100.0% [91.21%]
+#
+# This would also display a desktop notification (via D-Bus) if the percentage
+# goes below 5 percent while discharging. The block will also color RED.
+# If you don't have a desktop notification demon yet, take a look at dunst:
+#   http://www.knopwob.org/dunst/
+status.register("battery",
+    format="{status} {percentage:.2f}% [{percentage_design:.2f}%] {remaining:%E%hh:%Mm}",
+    alert=True,
+    alert_percentage=5,
+    status={
+        "DIS": "↓",
+        "CHR": "↑",
+        "FULL": "=",
+    },)
+
+
+# Displays whether a DHCP client is running
+status.register("runwatch",
+    name="DHCP",
+    path="/var/run/dhclient*.pid",)
+
+# Shows the address and up/down state of eth0. If it is up the address is shown in
+# green (the default value of color_up) and the CIDR-address is shown
+# (i.e. 10.10.10.42/24).
+# If it's down just the interface name (eth0) will be displayed in red
+# (defaults of format_down and color_down)
+#
+# Note: the network module requires PyPI package netifaces
+status.register("network",
+    interface="enp3s0",
+    format_up=" {v4cidr}",
+	format_down="")
+
+# Note: requires both netifaces and basiciw (for essid and quality)
+status.register("network",
+    interface="wlp2s0",
+    format_up=" {essid}  {quality:03.0f}%",
+	format_down="")
+
+# Shows disk usage of /
+# Format:
+# 42/128G [86G]
+status.register("disk",
+    path="/",
+    format="  {avail}G",)
+
+# Shows pulseaudio default sink volume
+#
+# Note: requires libpulseaudio from PyPI
+status.register("pulseaudio",
+    format="{volume}",format_muted="")
+
+#status.register("backlight",
+#	format="{brightness}",)
+
+status.register("shell",
+	command="~/.i3-blocks/blocks/brightness",)
+
+# Shows mpd status
+# Format:
+# Cloud connected▶Reroute to Remain
+status.register("cmus",
+    format="{status} {song_elapsed}/{song_length} {artist} - {title}",
+    status={
+        "stopped": "◾",
+        "playing": "▶",
+        "paused": "▷",
+    },format_not_running="",)
+
+status.run()
+