Add the new i3 configuration

42 files changed, 123 insertions, 1500 deletions

diff --git a/i3/.i3blocks.conf b/i3/.i3blocks.conf
deleted file mode 100644
index 2be3871..0000000
--- a/i3/.i3blocks.conf
+++ /dev/null
@@ -1,159 +0,0 @@
-# i3blocks config file
-#
-# Please see man i3blocks for a complete reference!
-# The man page is also hosted at http://vivien.github.io/i3blocks
-#
-# List of valid properties:
-#
-# align
-# color
-# command
-# full_text
-# instance
-# interval
-# label
-# min_width
-# name
-# separator
-# separator_block_width
-# short_text
-# signal
-# urgent
-
-# Global properties
-#
-# The top properties below are applied to every block, but can be overridden.
-# Each block command defaults to the script name to avoid boilerplate.
-command=/usr/lib/i3blocks/$BLOCK_NAME
-separator_block_width=15
-markup=none
-
-[cmus]
-command=~/.i3-blocks/blocks/cmus
-label= 
-markup=pango
-interval=repeat
-
-# Volume indicator
-#
-# The first parameter sets the step (and units to display)
-# The second parameter overrides the mixer selection
-# See the script for details.
-[volume]
-label=
-#label=♪
-instance=Master
-#instance=PCM
-interval=once
-signal=10
-
-# Memory usage
-#
-# The type defaults to "mem" if the instance is not specified.
-[memory]
-label=MEM
-separator=false
-interval=30
-
-#[memory]
-#label=SWAP
-#instance=swap
-#separator=false
-#interval=30
-
-# Disk usage
-#
-# The directory defaults to $HOME if the instance is not specified.
-# The script may be called with a optional argument to set the alert
-# (defaults to 10 for 10%).
-[disk]
-label=HOME
-#instance=/mnt/data
-interval=30
-
-# Network interface monitoring
-#
-# If the instance is not specified, use the interface used for default route.
-# The address can be forced to IPv4 or IPv6 with -4 or -6 switches.
-[iface]
-#instance=wlan0
-color=#00FF00
-interval=10
-separator=false
-
-[wifi]
-#instance=wlp3s0
-interval=10
-separator=false
-
-[bandwidth]
-#instance=eth0
-interval=5
-
-# CPU usage
-#
-# The script may be called with -w and -c switches to specify thresholds,
-# see the script for details.
-[cpu_usage]
-label=CPU
-interval=10
-min_width=CPU: 100.00%
-#separator=false
-
-#[load_average]
-#interval=10
-
-# Battery indicator
-#
-# The battery instance defaults to 0.
-#[battery]
-#label=BAT
-#label=⚡
-#instance=1
-#interval=30
-
-# Date Time
-#
-[time]
-command=date '+%Y-%m-%d %H:%M:%S'
-interval=1
-
-# Generic media player support
-#
-# This displays "ARTIST - SONG" if a music is playing.
-# Supported players are: spotify, vlc, audacious, xmms2, mplayer, and others.
-#[mediaplayer]
-#instance=spotify
-#interval=5
-#signal=10
-
-# OpenVPN support
-#
-# Support multiple VPN, with colors.
-#[openvpn]
-#interval=20
-
-# Temperature
-#
-# Support multiple chips, though lm-sensors.
-# The script may be called with -w and -c switches to specify thresholds,
-# see the script for details.
-#[temperature]
-#label=TEMP
-#interval=10
-
-# Key indicators
-#
-# Add the following bindings to i3 config file:
-#
-# bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
-# bindsym --release Num_Lock  exec pkill -SIGRTMIN+11 i3blocks
-#[keyindicator]
-#instance=CAPS
-#interval=once
-#signal=11
-
-#[keyindicator]
-#instance=NUM
-#interval=once
-#signal=11
diff --git a/i3/blocks/audio b/i3/blocks/audio
deleted file mode 100755
index c401c68..0000000
--- a/i3/blocks/audio
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  amixer -q sset Master 5%+
-# Middle click
-elif [[ "${BLOCK_BUTTON}" -eq 2 ]]; then
-  amixer -q sset Master toggle
-# Right click
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-  amixer -q sset Master 5%-
-fi
-
-statusLine=$(amixer get Master | tail -n 1)
-status=$(echo "${statusLine}" | grep -wo "on")
-volume=$(echo "${statusLine}" | awk -F ' ' '{print $5}' | tr -d '[]%')
-
-if [[ "${status}" == "on" ]]; then
-  echo "${volume}%"
-  echo "${volume}%"
-  echo ""
-else
-  echo "off"
-  echo "off"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/bandwidth b/i3/blocks/bandwidth
deleted file mode 100755
index f0b18cf..0000000
--- a/i3/blocks/bandwidth
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/bash
-# Source: http://www.onlamp.com/pub/a/linux/2000/11/16/LinuxAdmin.html
-
-INSTANCE="${BLOCK_INSTANCE}"
-
-if [[ "${INSTANCE}" = "" ]]; then
-  INSTANCE="wlp3s0;both"
-fi
-
-DISPLAY=$(echo "${INSTANCE}" | awk -F ';' '{print $2}')
-INSTANCE=$(echo "${INSTANCE}" | awk -F ';' '{print $1}')
-
-if [[ "${DISPLAY}" = "" ]]; then
-  DISPLAY="both"
-fi
-
-ONE_KB=1024
-ONE_MB=$(echo "${ONE_KB}*1024" | bc -l)
-TEN_MB=$(echo "${ONE_MB}*10" | bc -l)
-OHD_MB=$(echo "${TEN_MB}*10" | bc -l)
-
-URGENT_VALUE="${ONE_MB}"
-
-PREV_IN=0
-PREV_OUT=0
-
-PREV_FILE="/tmp/.bandwidth"
-
-if [[ -f "${PREV_FILE}" ]]; then
-  PREV_CONT=$(cat "${PREV_FILE}")
-  PREV_IN=$(echo "${PREV_CONT}" | head -n 1)
-  PREV_OUT=$(echo "${PREV_CONT}" | tail -n 1)
-fi
-
-BANDWIDTH=$(grep "${INSTANCE}" /proc/net/dev | awk -F: '{print  $2}' | awk '{print $1" "$9}')
-
-if [[ "${BANDWIDTH}" = "" ]]; then
-  exit
-fi
-
-BYTES_IN=$(echo "${BANDWIDTH}" | awk -F ' ' '{print $1}')
-BYTES_OUT=$(echo "${BANDWIDTH}" | awk -F ' ' '{print $2}')
-
-function FormatNumber() {
-  if [[ "${1}" -ge "${OHD_MB}" ]]; then
-    echo $(echo "scale=0;${1}/${ONE_MB}" | bc -l)"mb"
-  elif [[ "${1}" -ge "${TEN_MB}" ]]; then
-    echo $(echo "scale=1;${1}/${ONE_MB}" | bc -l)"mb"
-  elif [[ "${1}" -ge "${ONE_MB}" ]]; then
-    echo $(echo "scale=2;${1}/${ONE_MB}" | bc -l)"mb"
-  elif [[ "${1}" -ge "${ONE_KB}" ]]; then
-    echo $(echo "scale=0;${1}/${ONE_KB}" | bc -l)"kb"
-  else
-    echo "${1}""b"
-  fi
-}
-
-if [[ "${PREV_IN}" != "" ]] && [[ "${PREV_OUT}" != "" ]]; then
-  # Calculate the CPU usage since we last checked.
-  DIFF_IN=$(echo "scale=0;${BYTES_IN} - ${PREV_IN}" | bc -l)
-  DIFF_OUT=$(echo "scale=0;${BYTES_OUT} - ${PREV_OUT}" | bc -l)
-  DIFF_TOTAL=0
-
-  USAGE_IN=$(FormatNumber "${DIFF_IN}")
-  USAGE_OUT=$(FormatNumber "${DIFF_OUT}")
-
-  if [[ "${DISPLAY}" = "both" ]]; then
-    echo "${USAGE_IN} : ${USAGE_OUT}"
-    echo "${USAGE_IN} : ${USAGE_OUT}"
-    echo ""
-    DIFF_TOTAL=$((DIFF_TOTAL+DIFF_IN))
-    DIFF_TOTAL=$((DIFF_TOTAL+DIFF_OUT))
-  elif [[ "${DISPLAY}" = "in" ]]; then
-    echo "${USAGE_IN}"
-    echo "${USAGE_IN}"
-    echo ""
-    DIFF_TOTAL=$((DIFF_TOTAL+DIFF_IN))
-  elif [[ "${DISPLAY}" = "out" ]]; then
-    echo "${USAGE_OUT}"
-    echo "${USAGE_OUT}"
-    echo ""
-    DIFF_TOTAL=$((DIFF_TOTAL+DIFF_OUT))
-  fi
-else
-  echo "?"
-  echo "?"
-  echo ""
-fi
-
-# Remember the total and idle CPU times for the next check.
-echo "${BYTES_IN}" > "${PREV_FILE}"
-echo "${BYTES_OUT}" >> "${PREV_FILE}"
-
-if [[ "${DIFF_TOTAL}" -ge "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/battery b/i3/blocks/battery
deleted file mode 100755
index 3058f36..0000000
--- a/i3/blocks/battery
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-BATTERY=0
-BATTERY_INFO=$(acpi -b | grep "Battery ${BATTERY}")
-BATTERY_STATE=$(echo "${BATTERY_INFO}" | grep -wo "Full\|Charging\|Discharging")
-BATTERY_POWER=$(echo "${BATTERY_INFO}" | grep -o '[0-9]\+%' | tr -d '%')
-
-URGENT_VALUE=10
-
-if [[ "${BATTERY_STATE}" = "Charging" ]]; then
-  echo "${BATTERY_POWER}%+"
-  echo "${BATTERY_POWER}%+"
-  echo ""
-elif [[ "${BATTERY_STATE}" = "Discharging" ]]; then
-  echo "${BATTERY_POWER}%-"
-  echo "${BATTERY_POWER}%-"
-  echo ""
-else
-  echo "${BATTERY_POWER}%"
-  echo "${BATTERY_POWER}%"
-  echo ""
-fi
-
-if [[ "${BATTERY_POWER}" -le "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/bluetooth b/i3/blocks/bluetooth
deleted file mode 100755
index c9673a5..0000000
--- a/i3/blocks/bluetooth
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  sudo bluetooth on
-# Middle click
-elif [[ "${BLOCK_BUTTON}" -eq 2 ]]; then
-  sudo bluetooth toggle
-# Right click
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-  sudo bluetooth off
-fi
-
-STATUS=$(bluetooth | grep -wo 'on')
-
-if [[ "${STATUS}" = "on" ]]; then
-  echo "on"
-  echo "on"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/brightness b/i3/blocks/brightness
deleted file mode 100755
index f6294e4..0000000
--- a/i3/blocks/brightness
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-# One of the following: xrandr, xbacklight, kernel
-METHOD="xbacklight"
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  xbacklight -inc 5
-# Right click
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-  xbacklight -dec 5
-fi
-
-URGENT_VALUE=10
-
-if [[ "${METHOD}" = "xrandr" ]]; then
-  device="${BLOCK_INSTANCE:-primary}"
-  xrandrOutput=$(xrandr --verbose)
-
-  if [[ "${device}" = "primary" ]]; then
-    device=$(echo "${xrandrOutput}" | grep 'primary' | head -n 1 | awk -F ' ' '{print $1}')
-  fi
-
-  curBrightness=$(echo "${xrandrOutput}" | grep "${device}" -A 5 | grep -i "Brightness" | awk -F ':' '{print $2}')
-elif [[ "${METHOD}" = "kernel" ]]; then
-  device="${BLOCK_INSTANCE:-intel_backlight}"
-  maxBrightness=$(cat /sys/class/backlight/${device}/max_brightness)
-  curBrightness=$(cat /sys/class/backlight/${device}/brightness)
-elif [[ "${METHOD}" = "xbacklight" ]]; then
-  curBrightness=$(xbacklight -get)
-fi
-
-if [[ "${curBrightness}" -le 0 ]]; then
-  exit
-fi
-
-if [[ "${METHOD}" = "xrandr" ]]; then
-  percent=$(echo "scale=0;${curBrightness} * 100" | bc -l)
-elif [[ "${METHOD}" = "kernel" ]]; then
-  percent=$(echo "scale=0;${curBrightness} / ${maxBrightness} * 100" | bc -l)
-elif [[ "${METHOD}" = "xbacklight" ]]; then
-  percent=$(echo "scale=0;${curBrightness}" | bc -l)
-fi
-
-percent=${percent%.*}
-
-if [[ "${percent}" -le 0 ]]; then
-  exit
-fi
-
-echo "${percent}%"
-echo "${percent}%"
-echo ""
-
-if [[ "${percent}" -le "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/cmus b/i3/blocks/cmus
deleted file mode 100755
index f4d15b3..0000000
--- a/i3/blocks/cmus
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-INFO_CMUS=$(cmus-remote -Q 2>/dev/null)
-if [[ $? -eq 0 ]]; then
-  INFO_TITLE=$(echo "${INFO_CMUS}" | sed -n -e 's/^.*title//p' | head -n 1)
-  INFO_ALBUM=$(echo "${INFO_CMUS}" | sed -n -e 's/^.*album//p' | head -n 1)
-  INFO_ARTIST=$(echo "${INFO_CMUS}" | sed -n -e 's/^.*artist//p' | head -n 1)
-else
-  exit
-fi
-
-if [[ "${INFO_ARTIST}" ]] && [[ "${INFO_TITLE}" ]]; then
-  OUT_TEXT=$(echo "${INFO_ARTIST} - ${INFO_TITLE}" | xargs)
-elif [[ "${INFO_TITLE}" ]]; then
-  OUT_TEXT=$(echo "${INFO_TITLE}" | xargs)
-fi
-
-echo "${OUT_TEXT}"
-echo "${OUT_TEXT}"
-exit
\ No newline at end of file
diff --git a/i3/blocks/countdown b/i3/blocks/countdown
deleted file mode 100755
index 311a3b7..0000000
--- a/i3/blocks/countdown
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-END_DATE="${BLOCK_INSTANCE}"
-
-URGENT_VALUE=86400
-
-if [[ "${END_DATE}" = "" ]]; then
-  END_DATE=$(date --date "next Friday" "+%m/%d/%Y %H:%M:%S")
-fi
-
-END_DATE=$(date --date="${END_DATE}" '+%s')
-CUR_DATE=$(date "+%s")
-DIFF_DATE=$((END_DATE - CUR_DATE))
-DIFF=""
-
-if [[ "${DIFF_DATE}" -le 0 ]]; then
-  echo "${END_DATE}"
-  echo "${END_DATE}"
-  echo ""
-  exit 33
-fi
-
-if [[ "${DIFF_DATE}" -ge 86400 ]]; then
-  DIFF="[$((DIFF_DATE / 86400))] "
-  #DIFF_DATE=$((DIFF_DATE % 86400))
-fi
-
-DIFF+=$(date -u -d "@${DIFF_DATE}" +"%H:%M:%S")
-
-echo "${DIFF}"
-echo "${DIFF}"
-echo ""
-
-if [[ "${DIFF_DATE}" -le "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/cpu b/i3/blocks/cpu
deleted file mode 100755
index 2cb27ad..0000000
--- a/i3/blocks/cpu
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/bash
-# Source: http://askubuntu.com/a/450136
-
-URGENT_VALUE=90
-
-PREV_TOTAL=0
-PREV_IDLE=0
-
-cpuFile="/tmp/.cpu"
-
-if [[ -f "${cpuFile}" ]]; then
-  fileCont=$(cat "${cpuFile}")
-  PREV_TOTAL=$(echo "${fileCont}" | head -n 1)
-  PREV_IDLE=$(echo "${fileCont}" | tail -n 1)
-fi
-
-CPU=(`cat /proc/stat | grep '^cpu '`) # Get the total CPU statistics.
-unset CPU[0]                          # Discard the "cpu" prefix.
-IDLE=${CPU[4]}                        # Get the idle CPU time.
-
-# Calculate the total CPU time.
-TOTAL=0
-
-for VALUE in "${CPU[@]:0:4}"; do
-  let "TOTAL=$TOTAL+$VALUE"
-done
-
-if [[ "${PREV_TOTAL}" != "" ]] && [[ "${PREV_IDLE}" != "" ]]; then
-  # Calculate the CPU usage since we last checked.
-  let "DIFF_IDLE=$IDLE-$PREV_IDLE"
-  let "DIFF_TOTAL=$TOTAL-$PREV_TOTAL"
-  let "DIFF_USAGE=(1000*($DIFF_TOTAL-$DIFF_IDLE)/$DIFF_TOTAL+5)/10"
-  echo "${DIFF_USAGE}%"
-  echo "${DIFF_USAGE}%"
-  echo ""
-else
-  echo "?"
-  echo "?"
-  echo ""
-fi
-
-# Remember the total and idle CPU times for the next check.
-echo "${TOTAL}" > "${cpuFile}"
-echo "${IDLE}" >> "${cpuFile}"
-
-if [[ "${DIFF_USAGE}" -gt 0 ]] && [[ "${DIFF_USAGE}" -gt "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/datetime b/i3/blocks/datetime
deleted file mode 100755
index 178073f..0000000
--- a/i3/blocks/datetime
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/bash
-
-FORMAT="${BLOCK_INSTANCE:-%H:%M}"
-DATETIME=$(date "+${FORMAT}")
-
-echo "${DATETIME}"
-echo "${DATETIME}"
-echo ""
\ No newline at end of file
diff --git a/i3/blocks/display b/i3/blocks/display
deleted file mode 100755
index 9071900..0000000
--- a/i3/blocks/display
+++ /dev/null
@@ -1,68 +0,0 @@
-#!/bin/bash
-
-xrandrOut=$(xrandr)
-
-hdmiName=$(echo "${xrandrOut}" | grep -i 'HDMI' | awk '{print $1}')
-vgaName=$(echo "${xrandrOut}" | grep -i 'VGA' | awk '{print $1}')
-edpName=$(echo "${xrandrOut}" | grep -i 'EDP' | awk '{print $1}')
-
-activeDisplays=$(echo "${xrandrOut}" | grep " connected" | sed -e "s/\([A-Z0-9]\+\) connected.*/\1/" | tr -s '\n' ' ')
-displayFile='/tmp/.displays'
-
-if [[ -f "${displayFile}" ]]; then
-    oldDisplays=$(cat "${displayFile}")
-else
-    oldDisplays=""
-fi
-
-if [[ "${oldDisplays}" != "${activeDisplays}" ]]; then
-    change="yes"
-else
-    change="no"
-fi
-
-# External, HDMI + VGA
-if [[ "$activeDisplays" =~ "${hdmiName}" && "$activeDisplays" =~ "${vgaName}" ]]; then
-  if [[ "${change}" = "yes" ]]; then
-    $(xrandr --output "${edpName}" --off)
-    $(xrandr --output "${vgaName}" --auto)
-    $(xrandr --output "${hdmiName}" --primary --auto)
-  fi
-  echo "VGA1 & HDMI"
-  echo "VGA1 & HDMI"
-  echo ""
-# External, HDMI
-elif [[ "$activeDisplays" =~ "${hdmiName}" ]]; then
-  if [[ "${change}" = "yes" ]]; then
-    $(xrandr --output "${edpName}" --off)
-    $(xrandr --output "${vgaName}" --off)
-    $(xrandr --output "${hdmiName}" --primary --auto)
-  fi
-  echo "HDMI"
-  echo "HDMI"
-  echo ""
-# External, VGA
-elif [[ "$activeDisplays" =~ "${vgaName}" ]]; then
-  if [[ "${change}" = "yes" ]]; then
-    $(xrandr --output "${edpName}" --off)
-    $(xrandr --output "${vgaName}" --primary --auto)
-    $(xrandr --output "${hdmiName}" --off)
-  fi
-  echo "VGA"
-  echo "VGA"
-  echo
-# Only one internal
-elif [[ "$activeDisplays" =~ "${edpName}" ]]; then
-  if [[ "${change}" = "yes" ]]; then
-    $(xrandr --output "${edpName}" --primary --auto)
-    $(xrandr --output "${vgaName}" --off)
-    $(xrandr --output "${hdmiName}" --off)
-  fi
-  echo "eDP"
-  echo "eDP"
-  echo ""
-fi
-
-if [[ "${change}" = "yes" ]]; then
-  echo "${activeDisplays}" > "${displayFile}"
-fi
\ No newline at end of file
diff --git a/i3/blocks/feed b/i3/blocks/feed
deleted file mode 100755
index 0030939..0000000
--- a/i3/blocks/feed
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# WARNING: This has a LIMIT of 32 characters for now!
-# If your URL is longer you should use an URL shortener
-# Caused by https://github.com/vivien/i3blocks/blob/01a4f4a9ca1e3d0b3c95d1d62000ad8506bdff1a/include/block.h#L50
-# Example: https://goo.gl/
-FEED_URL="${BLOCK_INSTANCE:-https://www.archlinux.org/feeds/news/}"
-
-if [[ "${FEED_URL}" = "" ]]; then
-  exit
-fi
-
-# Follows redirects!
-FEED_CONTENT=$(curl ${FEED_URL} -s -L)
-FEED_TITLE=$(echo "${FEED_CONTENT}" | grep -v "xmlns:atom" | grep -o '<title>.*</title>' | head -n 1 | sed 's/\(<title>\|<\/title>\)//g')
-FEED_LINK=$(echo "${FEED_CONTENT}"  | grep -v "xmlns:atom" | grep -o '<link>.*</link>' | head -n 1 | sed 's/\(<link>\|<\/link>\)//g')
-
-if [[ "${FEED_TITLE}" = *404* ]]; then
-  echo "${FEED_URL}"
-  echo "${FEED_URL}"
-  echo ""
-  exit 33
-fi
-
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  xdg-open "${FEED_LINK}"
-fi
-
-echo "${FEED_TITLE}"
-echo "${FEED_TITLE}"
-echo ""
\ No newline at end of file
diff --git a/i3/blocks/firewall b/i3/blocks/firewall
deleted file mode 100755
index 6fe26f6..0000000
--- a/i3/blocks/firewall
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  sudo ufw enable
-# Middle click
-elif [[ "${BLOCK_BUTTON}" -eq 2 ]]; then
-  sudo ufw reload
-# Right click
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-  sudo ufw disable
-fi
-
-status=$(sudo ufw status 2>/dev/null)
-
-if [[ $? -gt 0 ]]; then
-  exit
-fi
-
-if [[ "${status}" != *inactive* ]]; then
-  echo "on"
-  echo "on"
-  echo ""
-else
-  echo "off"
-  echo "off"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/ip-address b/i3/blocks/ip-address
deleted file mode 100755
index d91ab56..0000000
--- a/i3/blocks/ip-address
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-IP_ADDRESS=$(ip route get 1 | awk '{print $NF;exit}')
-
-if [[ "${IP_ADDRESS}" != "" ]]; then
-  echo "${IP_ADDRESS}"
-  echo "${IP_ADDRESS}"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/keymap b/i3/blocks/keymap
deleted file mode 100755
index f25ee98..0000000
--- a/i3/blocks/keymap
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-KEYMAP_DIRECTORY='/usr/share/kbd/keymaps'
-
-# Aprrently localectl status does not update on keymap change. However, setxkbmap does.
-XKB_OUTPUT=$(setxkbmap -query)
-VC_KEYMAP=$(echo "${XKB_OUTPUT}" | grep "layout" | awk -F ':' '{print $2}' | tr -d ' ')
-VC_VARIANT=$(echo "${XKB_OUTPUT}" | grep "variant" | awk -F ':' '{print $2}' | tr -d ' ')
-
-# Keymap has not been specific, so it's not configured properly
-if [[ "${VC_KEYMAP}" == "" ]]; then
-  exit 1
-fi
-
-KEYMAP_FILE="${VC_KEYMAP}*"
-
-if [[ "${VC_VARIANT}" != "" ]]; then
-  KEYMAP_FILE="${KEYMAP_FILE}${VC_VARIANT}*"
-fi
-
-KEYMAP_NAME=$(basename $(dirname $(find ${KEYMAP_DIRECTORY} -name "${KEYMAP_FILE}")))
-
-if [[ "${KEYMAP_NAME}" ]]; then
-  echo "${KEYMAP_NAME}"
-  echo "${KEYMAP_NAME}"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/keystate b/i3/blocks/keystate
deleted file mode 100755
index e1543d7..0000000
--- a/i3/blocks/keystate
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-TYPE="${BLOCK_INSTANCE:-caps}"
-
-lockLine=$(xset -q | grep "Num Lock")
-
-capsLock=$(echo "${lockLine}" | awk -F ' ' '{print $4}')
-numLock=$(echo "${lockLine}" | awk -F ' ' '{print $8}')
-scrollLock=$(echo "${lockLine}" | awk -F ' ' '{print $12}')
-
-if [[ "${TYPE}" == "caps" ]]; then
-  checkLock="${capsLock}"
-elif [[ "${TYPE}" == "num" ]]; then
-  checkLock="${numLock}"
-elif [[ "${TYPE}" == "scroll" ]]; then
-  checkLock="${scrollLock}"
-else
-  exit
-fi
-
-if [[ "${checkLock}" == "on" ]]; then
-  echo "on"
-  echo "on"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/launcher b/i3/blocks/launcher
deleted file mode 100755
index 1e39432..0000000
--- a/i3/blocks/launcher
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-CONFIG_FILE="${BLOCK_INSTANCE:-~/.config/i3/config}"
-CONFIG_FILE=${CONFIG_FILE/\~/$HOME}
-
-LAUNCH_CMD=$(cat "${CONFIG_FILE}" | grep -v "^#" | grep -wi 'rofi\|dmenu' | awk -F 'exec ' '{print $2}')
-LAUNCH_NAME=$(echo "${LAUNCH_CMD}" |  awk -F ' ' '{print $1}')
-
-VARIABLES=$(cat "${CONFIG_FILE}" | grep -E 'set\ \$' | awk -F ' ' '{$1 = "";print $0}')
-
-while read varPair; do
-  varName=$(echo "${varPair}" | awk -F ' ' '{print $1}')
-  varValue=$(echo "${varPair}" | awk -F ' ' '{print $2}')
-  #echo "Replacing ${varName} with ${varValue}"
-  LAUNCH_CMD=$(echo ${LAUNCH_CMD} | sed "s|$varName|$varValue|g")
-done <<< "$(echo -e "$VARIABLES")"
-
-#echo "${LAUNCH_CMD}" && exit
-
-echo "${LAUNCH_NAME}"
-echo "${LAUNCH_NAME}"
-echo ""
-
-if [[ "${BLOCK_BUTTON}" -gt 0 ]]; then
-  eval ${LAUNCH_CMD} &
-fi
\ No newline at end of file
diff --git a/i3/blocks/load b/i3/blocks/load
deleted file mode 100755
index 448876f..0000000
--- a/i3/blocks/load
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/bash
-
-INSTANCE="${BLOCK_INSTANCE:-1}"
-
-URGENT_VALUE=90
-
-LOAD=$(cat /proc/loadavg | awk -F ' ' '{print $'"${INSTANCE}"'}')
-if [[ "${LOAD}" != "" ]]; then
-  LOAD_PERC=$(echo "scale=0; ${LOAD} * 100" | bc -l)
-  LOAD_PERC=${LOAD_PERC%.*}
-
-  echo "${LOAD}"
-  echo "${LOAD}"
-  echo ""
-
-  if [[ "${LOAD_PERC}" -ge "${URGENT_VALUE}" ]]; then
-    exit 33
-  fi
-fi
\ No newline at end of file
diff --git a/i3/blocks/locale b/i3/blocks/locale
deleted file mode 100755
index e517c44..0000000
--- a/i3/blocks/locale
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-LOCALE_INFO=$(localectl)
-LOCALE_NAME=$(echo "${LOCALE_INFO}" | grep "System Locale" | awk -F '=' '{print $2}' | cut -c 1-2)
-
-if [[ "${LOCALE_NAME}" ]]; then
-  echo "${LOCALE_NAME}"
-  echo "${LOCALE_NAME}"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/mail b/i3/blocks/mail
deleted file mode 100755
index 66b1d0a..0000000
--- a/i3/blocks/mail
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/bash
-
-# Requires https://www.google.com/settings/security/lesssecureapps for gmail.
-
-CONFIG_FILE="${BLOCK_INSTANCE}"
-CONFIG_FILE=${CONFIG_FILE/\~/$HOME}
-
-# Config file needs the following settings:
-#MAIL_SERVER="imap.domain.tld:993"
-#MAIL_USER="user@domain.tld"
-#MAIL_PASSWORD="secret"
-#MAIL_FOLDER="INBOX"
-
-if [[ ! -f "${CONFIG_FILE}" ]]; then
-  echo "${CONFIG_FILE}"
-  exit 33
-fi
-
-source "${CONFIG_FILE}"
-
-MAIN_DOMAIN=$(expr match "${MAIL_SERVER}" '.*\.\(.*\..*\)' | awk -F ':' '{print $1}')
-
-# Add https so xdg knows that it's a website
-if [[ "${MAIN_DOMAIN}" != http* ]]; then
-  MAIN_DOMAIN="https://${MAIN_DOMAIN}"
-fi
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  xdg-open "${MAIN_DOMAIN}"
-fi
-
-MAIL_FILE="/tmp/.mail"
-URGENT_VALUE="100"
-
-GET_UNREAD=$(cat<<EOF
-? LOGIN "${MAIL_USER}" "${MAIL_PASSWORD}"
-? STATUS "${MAIL_FOLDER}" (unseen)
-? LOGOUT
-EOF
-)
-
-echo "${GET_UNREAD}" | openssl s_client -connect "${MAIL_SERVER}" -crlf -ign_eof > "${MAIL_FILE}" 2>/dev/null 
-UNREAD_COUNT=$(cat "${MAIL_FILE}" | grep -i "UNSEEN" | grep -oE "[0-9]*" | head -n 1)
-
-# For security reasons
-rm "${MAIL_FILE}"
-
-if [[ "${UNREAD_COUNT}" = "" ]]; then
-  exit
-fi
-
-echo "${UNREAD_COUNT}"
-echo "${UNREAD_COUNT}"
-echo ""
-
-if [[ "${UNREAD_COUNT}" -ge URGENT_VALUE ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/memory b/i3/blocks/memory
deleted file mode 100755
index 866e7c3..0000000
--- a/i3/blocks/memory
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/bash
-
-# First argument is source (mem/swap), second is output value
-# Check /proc/meminfo for possible instances
-INSTANCE="${BLOCK_INSTANCE:-mem;free}"
-
-SOURCE=$(echo "${INSTANCE}" | awk -F ';' '{print $1}')
-DISPLAY=$(echo "${INSTANCE}" | awk -F ';' '{print $2}')
-
-if [[ "${SOURCE}" = "mem" ]]; then
-  URGENT_VALUE=90
-elif [[ "${SOURCE}" = "swap" ]]; then
-  URGENT_VALUE=50
-fi
-
-if [[ "${DISPLAY}" = "" ]]; then
-  DISPLAY="free"
-fi
-
-ONE_KB=1024
-ONE_MB=$(echo "${ONE_KB}*1024" | bc -l)
-ONE_GB=$(echo "${ONE_MB}*1024" | bc -l)
-ONE_TB=$(echo "${ONE_GB}*1024" | bc -l)
-
-# Grep the value and remove KB so we can calculate with it later
-#MEMINFO=$(cat /proc/meminfo | grep "${INSTANCE}" | awk -F ':' '{print $2}' | tr -d ' kB')
-MEMORY_INFOS=$(cat /proc/meminfo)
-SOURCE_TOTAL=$(echo "${MEMORY_INFOS}" | grep -i "${SOURCE}total" | awk -F ':' '{print $2}' | tr -d ' kB')
-
-if [[ "${SOURCE_TOTAL}" -le 0 ]]; then
-  exit
-fi
-
-SOURCE_FREE=$(echo "${MEMORY_INFOS}" | grep -i "${SOURCE}available" | awk -F ':' '{print $2}' | tr -d ' kB')
-SOURCE_USED=$(echo "scale=0; ${SOURCE_TOTAL}-${SOURCE_FREE}" | bc -l)
-SOURCE_PERC=$(echo "scale=0; (${SOURCE_USED}*100)/${SOURCE_TOTAL}" | bc -l)
-
-if [[ "${DISPLAY}" = "free" ]]; then
-  MEMINFO="${SOURCE_FREE}"
-elif [[ "${DISPLAY}" = "used" ]]; then
-  MEMINFO="${SOURCE_USED}"
-elif [[ "${DISPLAY}" = "total" ]]; then
-  MEMINFO="${SOURCE_TOTAL}"
-elif [[ "${DISPLAY}" = "perc" ]]; then
-  MEMINFO="${SOURCE_PERC}%"
-fi
-
-if [[ "${DISPLAY}" != "perc" ]]; then
-  # Convert KB meminfo to bytes
-  MEMINFO=$(echo "${MEMINFO}*${ONE_KB}" | bc -l)
-
-  if [[ "${MEMINFO}" -ge "${ONE_TB}" ]]; then
-    MEMINFO=$(echo "scale=3;${MEMINFO}/${ONE_TB}" | bc -l)"tb"
-  elif [[ "${MEMINFO}" -ge "${ONE_GB}" ]]; then
-    MEMINFO=$(echo "scale=2;${MEMINFO}/${ONE_GB}" | bc -l)"gb"
-  elif [[ "${MEMINFO}" -ge "${ONE_MB}" ]]; then
-    MEMINFO=$(echo "scale=1;${MEMINFO}/${ONE_MB}" | bc -l)"mb"
-  else
-    MEMINFO=$(echo "scale=0;${MEMINFO}/${ONE_KB}" | bc -l)"kb"
-  fi
-fi
-
-echo "${MEMINFO}"
-echo "${MEMINFO}"
-echo ""
-
-if [[ "${SOURCE_PERC}" -gt "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/microphone b/i3/blocks/microphone
deleted file mode 100755
index 76ff3f9..0000000
--- a/i3/blocks/microphone
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  amixer -q sset Capture 5%+
-# Middle click
-elif [[ "${BLOCK_BUTTON}" -eq 2 ]]; then
-  amixer -q sset Capture toggle
-# Right click
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-  amixer -q sset Capture 5%-
-fi
-
-statusLine=$(amixer get Capture | tail -n 1)
-status=$(echo "${statusLine}" | grep -wo "on")
-volume=$(echo "${statusLine}" | awk -F ' ' '{print $5}' | tr -d '[]%')
-
-if [[ "${status}" == "on" ]]; then
-  echo "${volume}%"
-  echo "${volume}%"
-  echo ""
-else
-  echo "off"
-  echo "off"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/network b/i3/blocks/network
deleted file mode 100755
index cb06e87..0000000
--- a/i3/blocks/network
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-device="${BLOCK_INSTANCE:-wlan0}"
-status=$(cat /sys/class/net/${device}/operstate)
-
-URGENT_VALUE=20
-
-if [[ "${status}" == "up" ]]; then
-  if [[ -d "/sys/class/net/${device}/wireless" ]]; then
-    quality=$(grep ${device} /proc/net/wireless | awk '{ print int($3 * 100 / 70) }')
-    echo "${quality}%"
-    echo "${quality}%"
-    echo ""
-
-    if [[ "${quality}" -le "${URGENT_VALUE}" ]]; then
-      exit 33
-    fi
-  else
-    echo "on"
-    echo "on"
-    echo ""
-  fi
-fi
\ No newline at end of file
diff --git a/i3/blocks/notifier b/i3/blocks/notifier
deleted file mode 100755
index 35c94f1..0000000
--- a/i3/blocks/notifier
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/bin/bash
-# IMPORTANT: 
-# To make this block work, you have to edit your block-command.
-# It should point to this file. For best performance, only use it on blocks
-# you want to monitor.
-# 
-# Example:
-# command=~/.i3-blocks/blocks/notifier $BLOCK_NAME
-
-BLOCK_NAME="${1}"
-
-if [[ "${BLOCK_NAME}" == "" ]] || [[ "${BLOCK_NAME}" == "notifier" ]]; then
-  exit 1
-fi
-
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-BLOCK_PATH="${SCRIPT_DIR}/${BLOCK_NAME}"
-
-if [[ ! -f "${BLOCK_PATH}" ]]; then
-  exit 1
-fi
-
-BLOCK_OUT=$(bash "${BLOCK_PATH}")
-BLOCK_URGENT=$?
-
-# Nothing to display.
-if [[ "${BLOCK_OUT}" == "" ]]; then
-  exit "${BLOCK_URGENT}"
-fi
-
-NOTIFY=0
-
-NOTIFY_CHANGES="weather display"
-NOTIFY_ALWAYS=""
-NOTIFY_NEVER="launcher playerctl scroll"
-
-if [[ "${NOTIFY_NEVER}" != *${BLOCK_NAME}* ]]; then
-  BLOCK_UCFIRST=$(echo "${BLOCK_NAME}" | head -c 1 | tr [a-z] [A-Z]; echo "${BLOCK_NAME}" | tail -c +2)
-
-  CHECK_SUM=$(echo "${BLOCK_NAME}-${BLOCK_INSTANCE}" | md5sum | awk '{print $1}')
-  CACHE_FILE="/tmp/.notify-cache-${CHECK_SUM}"
-
-  BLOCK_DESC=$(echo "${BLOCK_OUT}" | head -n 1)
-  BLOCK_VALUE=$(echo "${BLOCK_OUT}" | tail -n 1)
-  BLOCK_ICON=""
-
-  if [[ "${NOTIFY_ALWAYS}" == *${BLOCK_NAME}* ]]; then
-    NOTIFY=1
-  elif [[ "${BLOCK_URGENT}" -gt 0 ]]; then
-    NOTIFY=1
-  fi
-
-  VALUE_CHANGED=0
-  HAS_CACHEFILE=0
-  if [[ -f "${CACHE_FILE}" ]]; then
-    HAS_CACHEFILE=1
-    CACHED_VALUE=$(cat "${CACHE_FILE}")
-    #MODIFIED_TIME=$(stat -c '%Y' "${CACHE_FILE}")
-    #CURRENT_TIME=$(date +%s)
-    #ELAPSED_TIME=$((MODIFIED_TIME - CURRENT_TIME))
-    if [[ "${BLOCK_VALUE}" != "${CACHED_VALUE}" ]]; then
-      VALUE_CHANGED=1
-      if [[ "${NOTIFY_CHANGES}" == *${BLOCK_NAME}* ]]; then
-        NOTIFY=1
-      fi
-    fi
-  elif [[ "${NOTIFY_CHANGES}" == *${BLOCK_NAME}* ]]; then
-    NOTIFY=1
-  fi
-
-  if [[ "${NOTIFY}" -eq 1 ]]; then
-    if [[ "${BLOCK_NAME}" == "audio" ]]; then
-      BLOCK_MESSAGE="Audio level changed to ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "bandwidth" ]]; then
-      BLOCK_MESSAGE="Traffic went to ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "battery" ]]; then
-      BLOCK_MESSAGE="Energy changed to ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "countdown" ]]; then
-      BLOCK_MESSAGE="Remaining time is now ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "cpu" ]]; then
-      BLOCK_MESSAGE="CPU utilization is now ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "feed" ]]; then
-      BLOCK_MESSAGE="Newest article is ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "mail" ]]; then
-      BLOCK_MESSAGE="Unread emails went to ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "memory" ]]; then
-      BLOCK_MESSAGE="Memory utilization is now ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "packages" ]]; then
-      BLOCK_MESSAGE="${BLOCK_VALUE} packages are now ready to update."
-    elif [[ "${BLOCK_NAME}" == "space" ]]; then
-      BLOCK_MESSAGE="Space utilization is now ${BLOCK_INSTANCE}."
-    elif [[ "${BLOCK_NAME}" == "ssid" ]]; then
-      BLOCK_MESSAGE="SSID changed to ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "temperature" ]]; then
-      BLOCK_MESSAGE="Sensor temperature changed to ${BLOCK_VALUE}."
-    elif [[ "${BLOCK_NAME}" == "trash" ]]; then
-      BLOCK_MESSAGE="${BLOCK_VALUE} items are now in the trash."
-    else
-      BLOCK_MESSAGE="${BLOCK_UCFIRST} is now ${BLOCK_VALUE}."
-    fi
-
-    if [[ "${BLOCK_NAME}" == "audio" ]]; then
-      BLOCK_ICON="audio-volume-high-symbolic"
-    elif [[ "${BLOCK_NAME}" == "bandwidth" ]]; then
-      BLOCK_ICON="network-wireless-acquiring-symbolic"
-    elif [[ "${BLOCK_NAME}" == "battery" ]]; then
-      BLOCK_ICON="battery-symbolic"
-    elif [[ "${BLOCK_NAME}" == "bluetooth" ]]; then
-      BLOCK_ICON="bluetooth-active-symbolic"
-    elif [[ "${BLOCK_NAME}" == "brightness" ]]; then
-      BLOCK_ICON="display-brightness-symbolic"
-    elif [[ "${BLOCK_NAME}" == "cmus" ]]; then
-      BLOCK_ICON="emblem-music-symbolic"
-    elif [[ "${BLOCK_NAME}" == "countdown" ]]; then
-      BLOCK_ICON="document-open-recent-symbolic"
-    elif [[ "${BLOCK_NAME}" == "cpu" ]]; then
-      BLOCK_ICON="indicator-cpufreq"
-    elif [[ "${BLOCK_NAME}" == "datetime" ]]; then
-      BLOCK_ICON="system-run-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "device" ]]; then
-      BLOCK_ICON="system-run-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "display" ]]; then
-      BLOCK_ICON="video-display-symbolic"
-    elif [[ "${BLOCK_NAME}" == "feed" ]]; then
-      BLOCK_ICON="folder-documents-symbolic"
-    elif [[ "${BLOCK_NAME}" == "firewall" ]]; then
-      BLOCK_ICON="changes-prevent-symbolic.svg" # TODO
-    elif [[ "${BLOCK_NAME}" == "ip-address" ]]; then
-      BLOCK_ICON="avatar-default-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "keystate" ]]; then
-      BLOCK_ICON="format-text-underline-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "launcher" ]]; then
-      BLOCK_ICON="system-run-symbolic"
-    elif [[ "${BLOCK_NAME}" == "load" ]]; then
-      BLOCK_ICON="indicator-cpufreq" # TODO
-    elif [[ "${BLOCK_NAME}" == "locale" ]]; then
-      BLOCK_ICON="format-text-larger-symbolic"
-    elif [[ "${BLOCK_NAME}" == "mail" ]]; then
-      BLOCK_ICON="mail-send-symbolic"
-    elif [[ "${BLOCK_NAME}" == "memory" ]]; then
-      BLOCK_ICON="drive-harddisk-solidstate-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "microphone" ]]; then
-      BLOCK_ICON="audio-input-microphone-symbolic"
-    elif [[ "${BLOCK_NAME}" == "network" ]]; then
-      BLOCK_ICON="network-wireless-connected-symbolic"
-    elif [[ "${BLOCK_NAME}" == "packages" ]]; then
-      BLOCK_ICON="view-refresh-symbolic"
-    elif [[ "${BLOCK_NAME}" == "playerctl" ]]; then
-      BLOCK_ICON="emblem-music-symbolic"
-    elif [[ "${BLOCK_NAME}" == "process" ]]; then
-      BLOCK_ICON="process-stop-symbolic"
-    elif [[ "${BLOCK_NAME}" == "space" ]]; then
-      BLOCK_ICON="drive-harddisk-solidstate-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "ssid" ]]; then
-      BLOCK_ICON="system-users-symbolic"
-    elif [[ "${BLOCK_NAME}" == "temperature" ]]; then
-      BLOCK_ICON="object-inverse" # TODO
-    elif [[ "${BLOCK_NAME}" == "trash" ]]; then
-      BLOCK_ICON="user-trash-symbolic"
-    elif [[ "${BLOCK_NAME}" == "usb" ]]; then
-      BLOCK_ICON="drive-removable-media-usb-symbolic-1"
-    elif [[ "${BLOCK_NAME}" == "vpn" ]]; then
-      BLOCK_ICON="dialog-password-symbolic" # TODO
-    elif [[ "${BLOCK_NAME}" == "weather" ]]; then
-      BLOCK_ICON="weather-few-clouds-symbolic"
-    elif [[ "${BLOCK_NAME}" == "webcam" ]]; then
-      BLOCK_ICON="camera-web-symbolic"
-    elif [[ "${BLOCK_NAME}" == "window" ]]; then
-      BLOCK_ICON="view-dual-symbolic" # TODO
-    fi
-    
-    if [[ "${BLOCK_URGENT}" -gt 0 ]]; then
-      notify-send -u critical -t 5000 -i "${BLOCK_ICON}" -a "i3block-${BLOCK_NAME}" "${BLOCK_UCFIRST}" "${BLOCK_MESSAGE}"
-    else
-      notify-send -u normal -t 3500 -i "${BLOCK_ICON}" -a "i3block-${BLOCK_NAME}" "${BLOCK_UCFIRST}" "${BLOCK_MESSAGE}"
-    fi
-  fi
-
-  if [[ "${VALUE_CHANGED}" -eq 1 ]] || [[ "${HAS_CACHEFILE}" -eq 0 ]]; then
-    echo "${BLOCK_VALUE}" > "${CACHE_FILE}"
-  fi
-fi
-
-echo "${BLOCK_OUT}"
-exit "${BLOCK_URGENT}"
\ No newline at end of file
diff --git a/i3/blocks/packages b/i3/blocks/packages
deleted file mode 100755
index 923d479..0000000
--- a/i3/blocks/packages
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/bash
-
-PACKAGES=$(pacman -Qu)
-
-URGENT_VALUE=25
-
-if [[ $? -gt 0 ]]; then
-  return
-fi
-
-PACKAGE_COUNT=$(echo "${PACKAGES}" | wc -l)
-
-if [[ "${PACKAGE_COUNT}" -gt 0 ]]; then
-  echo "${PACKAGE_COUNT}" # full-text
-  echo "${PACKAGE_COUNT}" # short-text
-  echo ""
-  if [[ "${PACKAGE_COUNT}" -gt "${URGENT_VALUE}" ]]; then
-    exit 33
-  fi
-fi
\ No newline at end of file
diff --git a/i3/blocks/playerctl b/i3/blocks/playerctl
deleted file mode 100755
index 6d613ed..0000000
--- a/i3/blocks/playerctl
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/bash
-# Based on https://aur.archlinux.org/packages/playerctl/
-
-INSTANCE="${BLOCK_INSTANCE}"
-
-if [[ "${INSTANCE}" != "" ]]; then
-  ARGUMENTS="--player ${INSTANCE}"
-fi
-
-ICON_PLAY="➤"
-ICON_PAUSE="Ⅱ"
-ICON_STOP="≠"
-CUR_ICON=""
-
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-    $(playerctl ${ARGUMENTS} previous)
-elif [[ "${BLOCK_BUTTON}" -eq 2 ]]; then
-    $(playerctl ${ARGUMENTS} play-pause)
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-    $(playerctl ${ARGUMENTS} next)
-fi
-
-PLAYER_STATUS=$(playerctl ${ARGUMENTS} status)
-INFO_TITLE=$(playerctl ${ARGUMENTS} metadata title)
-INFO_ALBUM=$(playerctl ${ARGUMENTS} metadata album)
-INFO_ARTIST=$(playerctl ${ARGUMENTS} metadata artist)
-
-if [[ "${PLAYER_STATUS}" = "Paused" ]]; then
-  CUR_ICON="${ICON_PAUSE}"
-elif [[ "${PLAYER_STATUS}" = "Playing" ]]; then
-  CUR_ICON="${ICON_PLAY}"
-else
-  CUR_ICON="${ICON_STOP}"
-fi
-
-if [[ "${INFO_TITLE}" != "" ]] && [[ "${INFO_ARTIST}" != "" ]]; then
-  echo "${INFO_ARTIST} - ${INFO_TITLE} ${CUR_ICON}"
-  echo "${INFO_ARTIST} - ${INFO_TITLE} ${CUR_ICON}"
-fi
\ No newline at end of file
diff --git a/i3/blocks/process b/i3/blocks/process
deleted file mode 100755
index 078a241..0000000
--- a/i3/blocks/process
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-PROG="${BLOCK_INSTANCE:-i3}"
-
-PROG_REGEX="["$(echo "${PROG}" | cut -c 1)"]"$(echo "${PROG}" | cut -c 2-)" "
-PROCESS=$(ps -eo pid,cmd | grep -w ${PROG_REGEX})
-
-if [[ "${PROCESS}" ]]; then
-  echo "ok"
-  echo "ok"
-  echo ""
-else
-  echo "na"
-  echo "na"
-  echo ""
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/scroll b/i3/blocks/scroll
deleted file mode 100755
index 677a7fc..0000000
--- a/i3/blocks/scroll
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/bash
-# IMPORTANT: 
-# To make this block work, you have to edit your block-command.
-# It should point to this file. For best performance, only use it on blocks
-# which are wide and that you need to scroll.
-# 
-# Example:
-# command=~/.i3-blocks/blocks/scroll $BLOCK_NAME
-# markup=pango
-# interval=repeat
-
-PROG="${1}"
-
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-BLOCK_PATH="${SCRIPT_DIR}/${PROG}"
-
-INTERVAL=0.17
-MAX_LENGTH=25
-ADD_STR=" | "
-ADD_LENGTH=${#ADD_STR}
-
-if [[ -f "${BLOCK_PATH}" ]]; then
-  BLOCK_OUT=$(bash "${BLOCK_PATH}")
-  OUT_TEXT=$(echo "${BLOCK_OUT}" | tail -n 1)
-elif [[ "${PROG}" != "" ]]; then
-  OUT_TEXT=$(${PROG})
-  if [[ $? -ne 0 ]]; then
-    sleep 1
-    echo "${PROG}"
-    echo "${PROG}"
-    exit 33
-  fi
-fi
-
-if [[ "${OUT_TEXT}" ]]; then
-  CHECK_SUM=$(echo "${PROG}-${BLOCK_INSTANCE}" | md5sum | awk '{print $1}')
-
-  TMP_FILE="/tmp/.scroll-${CHECK_SUM}"
-
-  if [[ -f "${TMP_FILE}" ]]; then
-    SCROLL_POS=$(cat "${TMP_FILE}")
-  else
-    SCROLL_POS=0
-  fi
-
-  TEXT_LENGTH=${#OUT_TEXT}
-  MAX_OFFSET=$((TEXT_LENGTH +ADD_LENGTH -1))
-
-  if [[ "${TEXT_LENGTH}" -lt "${MAX_LENGTH}" ]]; then
-    MAX_LENGTH="${TEXT_LENGTH}"
-  fi
-
-  if [[ "${SCROLL_POS}" -gt "${MAX_OFFSET}" ]]; then
-    SCROLL_POS=0
-  fi
-
-  TEXT_LINE="${OUT_TEXT}${ADD_STR}${OUT_TEXT}${ADD_STR}${OUT_TEXT}"
-  TEXT_LINE=${TEXT_LINE:$SCROLL_POS:$MAX_LENGTH}
-
-  echo "<span font_family='monospace'>${TEXT_LINE}</span>"
-  echo "<span font_family='monospace'>${TEXT_LINE}</span>"
-
-  SCROLL_POS=$((SCROLL_POS +1))
-
-  echo "${SCROLL_POS}" > "${TMP_FILE}"
-  sleep "${INTERVAL}"
-else
-  sleep 1
-fi
diff --git a/i3/blocks/space b/i3/blocks/space
deleted file mode 100755
index 6e78d19..0000000
--- a/i3/blocks/space
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/bash
-
-INSTANCE="${BLOCK_INSTANCE}"
-URGENT_VALUE=90
-
-if [[ "${INSTANCE}" = "" ]]; then
-  INSTANCE="$HOME;free"
-fi
-
-DISPLAY=$(echo "${INSTANCE}" | awk -F ';' '{print $2}')
-INSTANCE=$(echo "${INSTANCE}" | awk -F ';' '{print $1}')
-
-if [[ "${DISPLAY}" = "" ]]; then
-  DISPLAY="free"
-fi
-
-SPACE_VARS=$(df -h "${INSTANCE}" | tail -n 1 | awk '{$1="";$6="";print $0}')
-PERC_SPACE=$(echo "${SPACE_VARS}" | awk -F ' ' '{print $4}' | tr -d '%')
-
-if [[ "${DISPLAY}" = "max" ]]; then
-  VALUE=$(echo "${SPACE_VARS}" | awk -F ' ' '{print $1}')
-elif [[ "${DISPLAY}" = "used" ]]; then
-  VALUE=$(echo "${SPACE_VARS}" | awk -F ' ' '{print $2}')
-elif [[ "${DISPLAY}" = "free" ]]; then
-  VALUE=$(echo "${SPACE_VARS}" | awk -F ' ' '{print $3}')
-elif [[ "${DISPLAY}" = "perc" ]]; then
-  VALUE="${PERC_SPACE}%"
-fi
-
-if [[ "${VALUE}" ]]; then
-  echo "${VALUE}"
-  echo "${VALUE}"
-  echo ""
-fi
-
-if [[ "${PERC_SPACE}" -gt "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/ssid b/i3/blocks/ssid
deleted file mode 100755
index d95c721..0000000
--- a/i3/blocks/ssid
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/bash
-
-SSID_NAME=$(iwgetid -r)
-
-# You can put any urgent name so the block will give warning
-# if a network with this name is used, like public wifi or alike.
-# You can separate multiple values with \|
-URGENT_VALUE=""
-
-if [[ "${SSID_NAME}" != "" ]]; then
-  echo "${SSID_NAME}"
-  echo "${SSID_NAME}"
-  echo ""
-
-  if [[ "${URGENT_VALUE}" != "" ]] && [[ $(echo "${SSID_NAME}" | grep -we "${URGENT_VALUE}") != "" ]]; then
-    exit 33
-  fi
-fi
\ No newline at end of file
diff --git a/i3/blocks/temperature b/i3/blocks/temperature
deleted file mode 100755
index 0c4b858..0000000
--- a/i3/blocks/temperature
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/bash
-
-TEMP_DEVICE="${BLOCK_INSTANCE:-Core}"
-TEMP_OUTPUT=$(sensors | grep "${TEMP_DEVICE}")
-
-IS_URGENT=0
-
-TOTAL_TEMP=0
-TOTAL_COUNT=0
-while read RESULT_LINE; do
-  TOTAL_COUNT=$((TOTAL_COUNT +1))
-  CURRENT_TEMP=$(echo "${RESULT_LINE}" | grep -o -E "[\+\-]?[0-9]*.[0-9]*°C" | sed -n '1p' | tr -d '+°C')
-  URGENT_VALUE=$(echo "${RESULT_LINE}" | grep -o -E "[\+\-]?[0-9]*.[0-9]*°C" | sed -n '2p' | tr -d '+°C')
-
-  TOTAL_TEMP=$(echo "scale=2;${TOTAL_TEMP}+${CURRENT_TEMP}" | bc -l)
-  IS_CRITICAL=$(echo "scale=0;${CURRENT_TEMP}-${URGENT_VALUE} >= 0" | bc -l)
-
-  if [[ "${IS_CRITICAL}" -eq 1 ]]; then
-    IS_URGENT=1
-  fi
-done <<< "$(echo -e "$TEMP_OUTPUT")"
-
-AVERAGE_TEMP=$(echo "scale=0;${TOTAL_TEMP}/${TOTAL_COUNT}" | bc -l)
-
-if [[ "${TOTAL_COUNT}" -gt 1 ]]; then
-  AVERAGE_TEMP="~ ${AVERAGE_TEMP}"
-fi
-
-echo "${AVERAGE_TEMP}°C"
-echo "${AVERAGE_TEMP}°C"
-echo ""
-
-if [[ "${IS_URGENT}" -eq 1 ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/trash b/i3/blocks/trash
deleted file mode 100755
index b567a54..0000000
--- a/i3/blocks/trash
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-TRASH_DIRECTORY="${BLOCK_INSTANCE}"
-
-if [[ "${TRASH_DIRECTORY}" = "" ]]; then
-  TRASH_DIRECTORY="${XDG_DATA_HOME:-${HOME}/.local/share}/Trash"
-fi
-
-# Left click
-if [[ "${BLOCK_BUTTON}" -eq 1 ]]; then
-  xdg-open "${TRASH_DIRECTORY}/files"
-# Right click
-elif [[ "${BLOCK_BUTTON}" -eq 3 ]]; then
-  # Delete all files permanently (unlink them)
-  rm -r "${TRASH_DIRECTORY}/files"
-  rm -r "${TRASH_DIRECTORY}/info"
-  # Create new directory
-  mkdir "${TRASH_DIRECTORY}/files"
-  mkdir "${TRASH_DIRECTORY}/info"
-fi
-
-TRASH_COUNT=$(ls -U -1 "${TRASH_DIRECTORY}/files" | wc -l)
-
-URGENT_VALUE=100
-
-echo "${TRASH_COUNT}"
-echo "${TRASH_COUNT}"
-echo ""
-
-if [[ "${TRASH_COUNT}" -ge "${URGENT_VALUE}" ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/usb b/i3/blocks/usb
deleted file mode 100755
index e294e7d..0000000
--- a/i3/blocks/usb
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-
-DEVICE_NAME="${BLOCK_INSTANCE:-Keyboard}"
-
-DEVICE_INFO=$(lsusb | grep -i "${DEVICE_NAME}")
-
-if [[ "${DEVICE_INFO}" != "" ]]; then
-  echo "on"
-  echo "on"
-  echo ""
-else
-  echo "na"
-  echo "na"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/user b/i3/blocks/user
deleted file mode 100755
index f9391ad..0000000
--- a/i3/blocks/user
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/usr/bin/bash
-
-echo "${USER}"
-echo "${USER}"
-echo ""
-
-if [[ $(id -u) -eq 0 ]]; then
-  exit 33
-fi
\ No newline at end of file
diff --git a/i3/blocks/vpn b/i3/blocks/vpn
deleted file mode 100755
index 8e54938..0000000
--- a/i3/blocks/vpn
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-VPNC_FILE='/var/run/vpnc.pid'
-
-if [[ -e "${VPNC_FILE}" ]]; then
-  echo "on"
-  echo "on"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/blocks/weather b/i3/blocks/weather
deleted file mode 100755
index 4eb3efe..0000000
--- a/i3/blocks/weather
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-# Based on http://openweathermap.org/current
-
-API_KEY="44db6a862fba0b067b1930da0d769e98"
-
-# Check on http://openweathermap.org/find
-CITY_ID="${BLOCK_INSTANCE}"
-
-URGENT_LOWER=0
-URGENT_HIGHER=30
-
-ICON_SUNNY=""
-ICON_CLOUDY=""
-ICON_RAINY=""
-ICON_STORM=""
-ICON_SNOW=""
-ICON_FOG=""
-
-SYMBOL_CELSIUS="℃"
-
-WEATHER_URL="http://api.openweathermap.org/data/2.5/weather?id=${CITY_ID}&appid=${API_KEY}&units=metric"
-
-WEATHER_INFO=$(wget -qO- "${WEATHER_URL}")
-WEATHER_MAIN=$(echo "${WEATHER_INFO}" | grep -o -e '\"main\":\"[a-Z]*\"' | awk -F ':' '{print $2}' | tr -d '"')
-WEATHER_TEMP=$(echo "${WEATHER_INFO}" | grep -o -e '\"temp\":\-\?[0-9]*' | awk -F ':' '{print $2}' | tr -d '"')
-
-if [[ "${WEATHER_MAIN}" = *Snow* ]]; then
-  echo "${ICON_SNOW} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo "${ICON_SNOW} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo ""
-elif [[ "${WEATHER_MAIN}" = *Rain* ]] || [[ "${WEATHER_MAIN}" = *Drizzle* ]]; then
-  echo "${ICON_RAINY} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo "${ICON_RAINY} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo ""
-elif [[ "${WEATHER_MAIN}" = *Cloud* ]]; then
-  echo "${ICON_CLOUDY} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo "${ICON_CLOUDY} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo ""
-elif [[ "${WEATHER_MAIN}" = *Clear* ]]; then
-  echo "${ICON_SUNNY} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo "${ICON_SUNNY} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo ""
-elif [[ "${WEATHER_MAIN}" = *Fog* ]] || [[ "${WEATHER_MAIN}" = *Mist* ]]; then
-  echo "${ICON_FOG} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo "${ICON_FOG} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo ""
-else
-  echo "${WEATHER_MAIN} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo "${WEATHER_MAIN} ${WEATHER_TEMP}${SYMBOL_CELSIUS}"
-  echo ""
-fi
-
-if [[ "${WEATHER_TEMP}" -lt "${URGENT_LOWER}" ]] || [[ "${WEATHER_TEMP}" -gt "${URGENT_HIGHER}" ]]; then
-  exit 33
-fi
diff --git a/i3/blocks/webcam b/i3/blocks/webcam
deleted file mode 100755
index 3c8eae9..0000000
--- a/i3/blocks/webcam
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-if [[ -c /dev/video0 ]]; then
-  if [[ "$(fuser /dev/video0)" != "" ]]; then
-    echo "rec"
-    echo "rec"
-    echo ""
-  else
-    echo "on"
-    echo "on"
-    echo ""
-  else
-    echo "off"
-    echo "off"
-    echo ""
-  fi
-fi
\ No newline at end of file
diff --git a/i3/blocks/window b/i3/blocks/window
deleted file mode 100644
index 9ef155a..0000000
--- a/i3/blocks/window
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-ACTIVE_WINDOW=$(xprop -id $(xprop -root _NET_ACTIVE_WINDOW | cut -d ' ' -f 5) WM_NAME | cut -d '"' -f 2)
-
-if [[ "${ACTIVE_WINDOW}" != "" ]]; then
-  echo "${ACTIVE_WINDOW}"
-  echo "${ACTIVE_WINDOW}"
-  echo ""
-fi
\ No newline at end of file
diff --git a/i3/config b/i3/config
index f96ee7e..8ea432d 100644
--- a/i3/config
+++ b/i3/config
@@ -1,4 +1,5 @@
 exec /home/neodarz/.back.sh
+exec evolution
 # This file has been auto-generated by i3-config-wiizard(1).
 # It will not be overwritten, so edit it as you like.
 #
@@ -71,6 +72,23 @@ font pango:monospace 8
 # Use Mouse+$mod to drag floating windows to their wanted position
 floating_modifier $mod
 
+# Sreen brightness controls
+bindsym XF86MonBrightnessUp exec xbacklight -inc 1 # increase screen brightness
+bindsym XF86MonBrightnessDown exec xbacklight -dec 1 # decrease screen brightness
+
+bindsym XF86AudioMute exec amixer set Master toggle
+
+bindsym XF86AudioLowerVolume exec amixer -q sset Master 1%-
+bindsym XF86AudioRaiseVolume exec amixer -q sset Master 1%+
+
+# Microphone control => amixer set Capture toggle
+bindsym $mod+control+m exec amixer set Capture toggle 
+
+
+# CAPS & NUM status
+bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
+bindsym --release Num_Lock exec pkill -SIGRTMIN+11 i3blocks
+
 # App
 bindsym --release $mod+o exec scrot ~/screenshots/%b\ %d-%H:%M:%S.png
 bindsym $mod+Shift+F1 exec terminator -x ranger
@@ -81,7 +99,7 @@ bindsym $mod+Shift+F5 exec firefox
 bindsym $mod+Shift+F6 exec terminator -x vim
 bindsym $mod+Shift+F7 exec terminator -x ncmpcpp
 bindsym $mod+Shift+v move morkspace to output right
-
+bindsym $mod+control+l exec i3lock -g
 # start a terminal
 bindsym $mod+Return exec terminator
 
@@ -205,5 +223,6 @@ bindsym $mod+r mode "resize"
 # Start i3bar to display a workspace bar (plus the system information i3status
 # finds out, if available)
 bar {
-        status_command i3blocks
+        #status_command i3blocks
+		status_command python ~/.config/i3pystatus/conf.py
 }
diff --git a/i3/myconf.sh b/i3/myconf.sh
deleted file mode 100755
index 4a0f519..0000000
--- a/i3/myconf.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/bash
-
-i3block | while :
-do
-	read line
-	music=`sh who.sh`
-	echo "$music | $line" || exit 1
-done
diff --git a/i3/who.sh b/i3/who.sh
deleted file mode 100755
index f91abb3..0000000
--- a/i3/who.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-title=$(cmus-remote -Q | grep title | cut -c11-)
-
-artist=$(cmus-remote -Q | grep artist | cut -c12-)
-
-echo "$artist - $title"
diff --git a/i3pystatus/conf.py b/i3pystatus/conf.py
new file mode 100644
index 0000000..b7d55c0
--- /dev/null
+++ b/i3pystatus/conf.py
@@ -0,0 +1,102 @@
+import logging
+from i3pystatus import Status
+
+status = Status(logfile='/home/neodarz/i3pystatus.log')
+
+status.register("keyboard_locks",
+	color="#008000",
+	format="{caps} {num}",
+	caps_off="",
+	num_off="",)
+
+# Displays clock like this:
+# Tue 30 Jul 11:59:46 PM KW31
+#                          ^-- calendar week
+status.register("clock",
+    format=" %a %-d %b   %X",)
+
+# Shows the average load of the last minute and the last 5 minutes
+# (the default value for format is used)
+#status.register("load")
+
+# Shows your CPU temperature, if you have a Intel CPU
+status.register("temp",
+    format=" {temp:.0f}°C",)
+
+# The battery monitor has many formatting options, see README for details
+
+# This would look like this, when discharging (or charging)
+# ↓14.22W 56.15% [77.81%] 2h:41m
+# And like this if full:
+# =14.22W 100.0% [91.21%]
+#
+# This would also display a desktop notification (via D-Bus) if the percentage
+# goes below 5 percent while discharging. The block will also color RED.
+# If you don't have a desktop notification demon yet, take a look at dunst:
+#   http://www.knopwob.org/dunst/
+status.register("battery",
+    format="{status} {percentage:.2f}% [{percentage_design:.2f}%] {remaining:%E%hh:%Mm}",
+    alert=True,
+    alert_percentage=5,
+    status={
+        "DIS": "↓",
+        "CHR": "↑",
+        "FULL": "=",
+    },)
+
+
+# Displays whether a DHCP client is running
+status.register("runwatch",
+    name="DHCP",
+    path="/var/run/dhclient*.pid",)
+
+# Shows the address and up/down state of eth0. If it is up the address is shown in
+# green (the default value of color_up) and the CIDR-address is shown
+# (i.e. 10.10.10.42/24).
+# If it's down just the interface name (eth0) will be displayed in red
+# (defaults of format_down and color_down)
+#
+# Note: the network module requires PyPI package netifaces
+status.register("network",
+    interface="enp3s0",
+    format_up=" {v4cidr}",
+	format_down="")
+
+# Note: requires both netifaces and basiciw (for essid and quality)
+status.register("network",
+    interface="wlp2s0",
+    format_up=" {essid}  {quality:03.0f}%",
+	format_down="")
+
+# Shows disk usage of /
+# Format:
+# 42/128G [86G]
+status.register("disk",
+    path="/",
+    format="  {avail}G",)
+
+# Shows pulseaudio default sink volume
+#
+# Note: requires libpulseaudio from PyPI
+status.register("pulseaudio",
+    format="{volume}",format_muted="")
+
+#status.register("backlight",
+#	format="{brightness}",)
+
+status.register("shell",
+	command="~/.i3-blocks/blocks/brightness",)
+
+# Shows mpd status
+# Format:
+# Cloud connected▶Reroute to Remain
+status.register("cmus",
+    format="{status} {song_elapsed}/{song_length} {artist} - {title}",
+    status={
+        "stopped": "◾",
+        "playing": "▶",
+        "paused": "▷",
+    },format_not_running="",)
+
+status.run()
+