import logging
from i3pystatus import Status

status = Status(logfile='/home/neodarz/i3pystatus.log')

status.register("text",
        text=" ░▒▓█",)

status.register("keyboard_locks",
	format="{caps} {num}",
        hints = {"separator": False, "separator_block_width": 0},
	caps_off="",
	num_off="",)

status.register("text",
        text=" ░▒▓█▓▒░ ",
        hints = {"separator": False, "separator_block_width": 0},)

# Displays clock like this:
# Tue 30 Jul 11:59:46 PM KW31
#                          ^-- calendar week
status.register("clock",
    format=" %a %-d %b   %X",
    hints = {"separator": False, "separator_block_width": 0},)

status.register("text",
        text=" ░▒▓█▓▒░ ",
        hints = {"separator": False, "separator_block_width": 0},)



# Shows the average load of the last minute and the last 5 minutes
# (the default value for format is used)
#status.register("load")

# Shows your CPU temperature, if you have a Intel CPU
#status.register("temp",
 #   format=" {temp:.0f}°C",)

# The battery monitor has many formatting options, see README for details

# This would look like this, when discharging (or charging)
# ↓14.22W 56.15% [77.81%] 2h:41m
# And like this if full:
# =14.22W 100.0% [91.21%]
#
# This would also display a desktop notification (via D-Bus) if the percentage
# goes below 5 percent while discharging. The block will also color RED.
# If you don't have a desktop notification demon yet, take a look at dunst:
#   http://www.knopwob.org/dunst/
#status.register("battery",
#    format="{status} {percentage:.2f}% [{percentage_design:.2f}%] {remaining:%E%hh:%Mm}",
#    alert=True,
#    alert_percentage=5,
#    status={
#        "DIS": "↓",
#        "CHR": "↑",
#        "FULL": "=",
#    },)


# Displays whether a DHCP client is running
#status.register("runwatch",
#    name="DHCP",
#    path="/var/run/dhclient*.pid",)


# Shows the address and up/down state of eth0. If it is up the address is shown in
# green (the default value of color_up) and the CIDR-address is shown
# (i.e. 10.10.10.42/24).
# If it's down just the interface name (eth0) will be displayed in red
# (defaults of format_down and color_down)
#
# Note: the network module requires PyPI package netifaces
status.register("network",
        dynamic_color=True,
        start_color="#138491",
        color_down="#138491",
        end_color="#138491",
    interface="enp3s0",
    format_up="<span color=\"#138491\"> {v4cidr}</span>",
	format_down="<span color=\"#138491\"></span>",
        hints = {"markup": "pango", "separator": False, "separator_block_width": 0},)

status.register("text",
        text=" ░▒▓█▓▒░ ",
        hints = {"separator": False, "separator_block_width": 0},)

# Note: requires both netifaces and basiciw (for essid and quality)
status.register("network",
    interface="wlp3s0",
    format_up=" {essid}  {quality:03.0f}%",
	format_down="",
    hints = {"markup": "pango", "separator": False, "separator_block_width": 0},)

status.register("text",
        text=" ░▒▓█▓▒░ ",
        hints = {"separator": False, "separator_block_width": 0},)

# Shows disk usage of /
# Format:
# 42/128G [86G]
status.register("disk",
    path="/",
    format="  {avail}G",
    hints = {"separator": False, "separator_block_width": 0},)

status.register("text",
        text=" ░▒▓█▓▒░ ",
        hints = {"separator": False, "separator_block_width": 0},)

# Shows pulseaudio default sink volume
#
# Note: requires libpulseaudio from PyPI
status.register("pulseaudio",
    format="{volume}",format_muted="",
    hints = {"separator": False, "separator_block_width": 0},)

status.register("text",
        text=" █▓▒░ ",
        hints = {"separator": False, "separator_block_width": 0},)

#status.register("backlight",
#	format="{brightness}",)

#status.register("shell",
#	command="~/.i3-blocks/blocks/brightness",)

# Shows mpd status
# Format:
# Cloud connected▶Reroute to Remain
status.register("cmus",
    format="{status} {song_elapsed}/{song_length} {artist} - {title}",
    status={
        "stopped": "◾",
        "playing": "▶",
        "paused": "▷",
    },format_not_running="",
    hints = {"separator": False, "separator_block_width": 0},)


status.register("now_playing",
    player="clementine",
    color="#ffc080",
    hints = {"separator": False, "separator_block_width": 0},
	format='{status} {artist} - {title} {song_elapsed}/{song_length}',
#	status = {
 #         "Playing": "plsay",
  #        "Paused": "pause",
  #        "Stopped": "stop",
  #   }
)

status.run()