From e82b123f40f7af3f5098ceff7f4f594eaa91634f Mon Sep 17 00:00:00 2001 From: NeodarZ Date: Thu, 16 Feb 2017 01:30:15 +0100 Subject: Add my i3pystatus beautiful conf --- i3pystatus/conf.py | 150 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) create mode 100644 i3pystatus/conf.py diff --git a/i3pystatus/conf.py b/i3pystatus/conf.py new file mode 100644 index 0000000..6f29414 --- /dev/null +++ b/i3pystatus/conf.py @@ -0,0 +1,150 @@ +import logging +from i3pystatus import Status + +status = Status(logfile='/home/neodarz/i3pystatus.log') + +status.register("text", + text=" ░▒▓█",) + +status.register("keyboard_locks", + format="{caps} {num}", + hints = {"separator": False, "separator_block_width": 0}, + caps_off="", + num_off="",) + +status.register("text", + text=" ░▒▓█▓▒░ ", + hints = {"separator": False, "separator_block_width": 0},) + +# Displays clock like this: +# Tue 30 Jul 11:59:46 PM KW31 +# ^-- calendar week +status.register("clock", + format=" %a %-d %b  %X", + hints = {"separator": False, "separator_block_width": 0},) + +status.register("text", + text=" ░▒▓█▓▒░ ", + hints = {"separator": False, "separator_block_width": 0},) + + + +# Shows the average load of the last minute and the last 5 minutes +# (the default value for format is used) +#status.register("load") + +# Shows your CPU temperature, if you have a Intel CPU +#status.register("temp", + # format=" {temp:.0f}°C",) + +# The battery monitor has many formatting options, see README for details + +# This would look like this, when discharging (or charging) +# ↓14.22W 56.15% [77.81%] 2h:41m +# And like this if full: +# =14.22W 100.0% [91.21%] +# +# This would also display a desktop notification (via D-Bus) if the percentage +# goes below 5 percent while discharging. The block will also color RED. +# If you don't have a desktop notification demon yet, take a look at dunst: +# http://www.knopwob.org/dunst/ +#status.register("battery", +# format="{status} {percentage:.2f}% [{percentage_design:.2f}%] {remaining:%E%hh:%Mm}", +# alert=True, +# alert_percentage=5, +# status={ +# "DIS": "↓", +# "CHR": "↑", +# "FULL": "=", +# },) + + +# Displays whether a DHCP client is running +#status.register("runwatch", +# name="DHCP", +# path="/var/run/dhclient*.pid",) + + +# Shows the address and up/down state of eth0. If it is up the address is shown in +# green (the default value of color_up) and the CIDR-address is shown +# (i.e. 10.10.10.42/24). +# If it's down just the interface name (eth0) will be displayed in red +# (defaults of format_down and color_down) +# +# Note: the network module requires PyPI package netifaces +status.register("network", + dynamic_color=True, + start_color="#138491", + color_down="#138491", + end_color="#138491", + interface="enp3s0", + format_up=" {v4cidr}", + format_down="", + hints = {"markup": "pango", "separator": False, "separator_block_width": 0},) + +status.register("text", + text=" ░▒▓█▓▒░ ", + hints = {"separator": False, "separator_block_width": 0},) + +# Note: requires both netifaces and basiciw (for essid and quality) +#status.register("network", +# interface="wlp2s0", +# format_up=" {essid}  {quality:03.0f}%", +# format_down="") + +# Shows disk usage of / +# Format: +# 42/128G [86G] +status.register("disk", + path="/", + format=" {avail}G", + hints = {"separator": False, "separator_block_width": 0},) + +status.register("text", + text=" ░▒▓█▓▒░ ", + hints = {"separator": False, "separator_block_width": 0},) + +# Shows pulseaudio default sink volume +# +# Note: requires libpulseaudio from PyPI +status.register("pulseaudio", + format="{volume}",format_muted="", + hints = {"separator": False, "separator_block_width": 0},) + +status.register("text", + text=" █▓▒░ ", + hints = {"separator": False, "separator_block_width": 0},) + +#status.register("backlight", +# format="{brightness}",) + +#status.register("shell", +# command="~/.i3-blocks/blocks/brightness",) + +# Shows mpd status +# Format: +# Cloud connected▶Reroute to Remain +status.register("cmus", + format="{status} {song_elapsed}/{song_length} {artist} - {title}", + status={ + "stopped": "◾", + "playing": "▶", + "paused": "▷", + },format_not_running="", + hints = {"separator": False, "separator_block_width": 0},) + + +status.register("now_playing", + player="clementine", + color="#ffc080", + hints = {"separator": False, "separator_block_width": 0}, + format='{status} {artist} - {title} {song_elapsed}/{song_length}', +# status = { + # "Playing": "plsay", + # "Paused": "pause", + # "Stopped": "stop", + # } +) + +status.run() + -- cgit v1.2.1