[BACK] Return to configure.in CVS log [TXT][DIR] Up to Nevrax / code / nel

Diff for /code/nel/configure.in between version 1.32 and 1.48

version 1.32, 2001/04/10 13:44:50 version 1.48, 2001/08/08 09:37:04
Line 10 
Line 10 
  
  
 dnl MAJOR_VERSION correspond to the CURRENT interface number. dnl MAJOR_VERSION correspond to the CURRENT interface number.
 dnl MINOR_VERSION correspond to the interface's REVISION (implementation) dnl MINOR_VERSION correspond to the interface REVISION (implementation)
 dnl               number. dnl               number.
 dnl PICO_VERSION correspond to the interface's AGE, which is the number dnl PICO_VERSION correspond to the interface AGE, which is the number
 dnl              of previous additional interfaces supported by this library. dnl              of previous additional interfaces supported by this library.
 dnl              It must be less than or equal to CURRENT. dnl              It must be less than or equal to CURRENT.
  
Line 20 
Line 20 
 MINOR_VERSION=3 MINOR_VERSION=3
 PICO_VERSION=0 PICO_VERSION=0
  
 AM_INIT_AUTOMAKE(nel,$MAJOR_VERSION.$MINOR_VERSION.$PICO_VERSION) VERSION=$MAJOR_VERSION.$MINOR_VERSION.$PICO_VERSION
  
  AM_INIT_AUTOMAKE(nel,$VERSION)
  
 LIBTOOL_VERSION=$MAJOR_VERSION:$MINOR_VERSION:$PICO_VERSION LIBTOOL_VERSION=$MAJOR_VERSION:$MINOR_VERSION:$PICO_VERSION
  
  AC_SUBST(VERSION)
 AC_SUBST(LIBTOOL_VERSION) AC_SUBST(LIBTOOL_VERSION)
  
 AM_CONFIG_HEADER(include/nelconfig.h) AM_CONFIG_HEADER(include/nelconfig.h)
  
  
 dnl The following hack should ensure that configure doesn't add optimizing dnl The following hack should ensure that configure doesnt add optimizing
 dnl or debugging flags to CFLAGS or CXXFLAGS dnl or debugging flags to CFLAGS or CXXFLAGS
 CFLAGS="$CFLAGS " CFLAGS="$CFLAGS "
 CXXFLAGS="$CXXFLAGS " CXXFLAGS="$CXXFLAGS "
  
  
 dnl ==================================================================== dnl ====================================================================
  dnl Checks NeL modules (net, 3d, ai) to install / Disable
  
  dnl the misc is mandatory, it is use by the other modules.
  NEL_SUBDIRS="misc"
  
  dnl Network library
  AC_ARG_ENABLE( net,
      [  --disable-net           disable compilation and install of NeL Network.],
      , enable_net=yes )
  
  if test $enable_net = "no";
  then
     AC_MSG_RESULT(disable NEL Network.)
  else
     NEL_SUBDIRS="$NEL_SUBDIRS net"
  fi
  
  dnl 3D library
  AC_ARG_ENABLE( 3d,
      [  --disable-3d            disable compilation and install of NeL 3D.],
      , enable_3d=yes )
  
  if test $enable_3d = "no";
  then
     AC_MSG_RESULT(disable NEL 3D.)
  else
     NEL_SUBDIRS="$NEL_SUBDIRS 3d"
  fi
  
  dnl PACS library
  AC_ARG_ENABLE( pacs,
      [  --disable-pacs          disable compilation and install of NeL PACS.],
      , enable_pacs=yes )
  
  if test $enable_pacs = "no";
  then
     AC_MSG_RESULT(disable NEL PACS.)
  else
     NEL_SUBDIRS="$NEL_SUBDIRS pacs"
  fi
  
  dnl Sound library
  AC_ARG_ENABLE( sound,
      [  --enable-sound          enable compilation and install of NeL Sound.],
      , enable_sound=no )
  
  if test $enable_sound = "yes";
  then
     AC_MSG_RESULT(enable NEL Sound.)
     NEL_SUBDIRS="$NEL_SUBDIRS sound"
  fi
  
  dnl AI library
  AC_ARG_ENABLE( ai,
      [  --enable-ai             enable compilation and install of NeL AI.],
      , enable_ai=no )
  
  if test $enable_ai = "yes";
  then
     AC_MSG_RESULT(enable NEL AI.)
     NEL_SUBDIRS="$NEL_SUBDIRS ai"
  fi
  
  AC_SUBST(NEL_SUBDIRS)
  
  
  dnl ====================================================================
 dnl Checks for programs. dnl Checks for programs.
  
 AC_PROG_MAKE_SET AC_PROG_MAKE_SET
Line 70 
Line 140 
 fi fi
  
 AC_ARG_WITH( python-version, AC_ARG_WITH( python-version,
     [ --with-python-version=<version>     Python version to use, e.g. 1.5],     [  --with-python-version=<version>
                            Python version to use, e.g. 1.5],
     [PYTHON_VERSION=$withval     [PYTHON_VERSION=$withval
       AC_MSG_RESULT(using Python $withval.)]       AC_MSG_RESULT(using Python $withval.)]
 ) )
Line 83 
Line 154 
 fi fi
  
 AC_PATH_PROGS(PYTHON, $PYTHON_EXEC, no, $PATH) AC_PATH_PROGS(PYTHON, $PYTHON_EXEC, no, $PATH)
 if test "$PYTHON" = "no"; if test "$PYTHON" = "no" -a "$enable_ai" = "yes"
 then then
     AC_MSG_ERROR([Python is needed to compile NeL (www.python.org)])     AC_MSG_ERROR([Python is needed to compile NeL (www.python.org)])
 fi fi
Line 99 
Line 170 
 dnl ==================================================================== dnl ====================================================================
 dnl Checks for typedefs, structures, and compiler characteristics. dnl Checks for typedefs, structures, and compiler characteristics.
  
 dnl Supress GCC's "multi-character character constant" warnings. dnl Supress GCC "multi-character character constant" warnings.
 if test "X$CC" = "Xgcc"; if test "X$CC" = "Xgcc";
 then then
         CXXFLAGS="$CXXFLAGS -Wno-multichar"         CXXFLAGS="$CXXFLAGS -Wno-multichar"
Line 126 
Line 197 
  
 AC_PATH_X AC_PATH_X
          
 if test ! "$no_x" = "yes" ; then if test ! "$no_x" = "yes"
     if test ! X"$x_libraries" = X ; then then
      if test ! X"$x_libraries" = X
      then
         LIBS="$LIBS -L$x_libraries"         LIBS="$LIBS -L$x_libraries"
     fi     fi
     if test ! X"$x_includes" = X ; then     if test ! X"$x_includes" = X
      then
         CXXFLAGS="$CXXFLAGS -I$x_includes"         CXXFLAGS="$CXXFLAGS -I$x_includes"
     fi     fi
 else else
      if test "$enable_3d" = "yes"
      then
     AC_MSG_ERROR(X11 must be installed.)     AC_MSG_ERROR(X11 must be installed.)
 fi fi
  fi
  
  
 dnl ========== dnl ==========
 dnl STLPort dnl STLPort
 dnl ========== dnl ==========
  
 dnl Ask user for path to the STLport header files dnl Ask user for path to the STLport files location
 AC_ARG_WITH( stlport, AC_ARG_WITH( stlport,
     [ --with-stlport=<path>    path to the STLPort header files directory.     [  --with-stlport=<path>   path to the STLPort install files directory.
                           e.g. /usr/local/include/stlport],                           e.g. /usr/local/stlport ]
     [STLPORT_DIR=$with_stlport )
       AC_MSG_RESULT(using STLPort header files located in $with_stlport)], 
     AC_MSG_ERROR([You must call configure with the --with-stlport option. AC_ARG_WITH( stlport-include,
     This tells configure where to find the STLPort header files.     [  --with-stlport-include=<path>
     e.g. --with-stlport=/usr/local/include/stlport])                           path to the STLPort header files directory.
                            e.g. /usr/local/stlport/stlport ]
  )
  
  AC_ARG_WITH( stlport-lib,
      [  --with-stlport-lib=<path>
                            path to the STLPort library files directory.
                            e.g. /usr/local/stlport/lib ]
  )
  
  if test "$with_stlport" != "no"
  then
      if test -z "$with_stlport" && test -z "$with_stlport_lib" -o -z "$with_stlport_include"
      then
          AC_MSG_ERROR([You must call configure with the --with-stlport or --with-stlport-lib and with-stlport-include options.
  This tells configure where to find the STLPort files.])
      fi
  
      if test $with_stlport
      then
          AC_MSG_RESULT(using STLPort files located in $with_stlport)
  
          STLPORT_CFLAGS="-I$with_stlport/stlport"
          STLPORT_LIB="-L$with_stlport/lib"
      fi
  else
      no_stlport="no"
      AC_MSG_RESULT(*** Override the use of the STLPorts (EXPERIMENTAL) ***)
  fi
  
  if test -z "$no_stlport" -a "$with_stlport_include"
  then
      AC_MSG_RESULT(using STLPort header files located in $with_stlport_include)
      STLPORT_CFLAGS="-I$with_stlport_include"
  fi
  
  if test -z "$no_stlport" -a  "$with_stlport_lib"
  then
      AC_MSG_RESULT(using STLPort library files located in $with_stlport_lib)
      STLPORT_LIB="-L$with_stlport_lib"
  fi
  
  
  dnl ==========
  dnl OpenAL
  dnl ==========
  
  dnl Ask user for path to the OpenAL files location
  AC_ARG_WITH( openal,
      [  --with-openal=<path>   path to the OpenAL install files directory.
                            e.g. /usr/local]
 ) )
  
 if test X"$STLPORT_DIR" != X; AC_ARG_WITH( openal-include,
      [  --with-openal-include=<path>
                            path to the OpenAL header files directory.
                            e.g. /usr/local/include]
  )
  
  AC_ARG_WITH( openal-lib,
      [  --with-openal-lib=<path>
                            path to the OpenAL library files directory.
                            e.g. /usr/local/lib]
  )
  
  if test $with_openal
 then then
     CXXFLAGS="-I$STLPORT_DIR $CXXFLAGS"     AC_MSG_RESULT(using OpenAL files located in $with_openal)
  
      OPENAL_CFLAGS="$with_openal/include"
      OPENAL_LIB="$with_openal/lib"
  fi
  
  if test "$with_openal_include"
  then
      AC_MSG_RESULT(using OpenAL header files located in $with_openal_include)
      OPENAL_CFLAGS="$with_openal_include"
  fi
  
  if test "$with_openal_lib"
  then
      AC_MSG_RESULT(using OpenAL library files located in $with_openal_lib)
      OPENAL_LIB="$with_openal_lib"
 fi fi
  
  
Line 174 
Line 328 
  
 AC_SUBST(PYTHON_CFLAGS) AC_SUBST(PYTHON_CFLAGS)
  
 AC_MSG_CHECKING("for Python header files") AC_MSG_CHECKING(for Python header files)
 AC_EGREP_CPP( yo_python, AC_EGREP_CPP( yo_python,
 [#include <Python.h> [#include <Python.h>
    yo_python    yo_python
 ], ],
 [AC_MSG_RESULT("ok")], [ AC_MSG_RESULT(ok)],
    AC_MSG_RESULT(no)
    if test "$enable_ai" = "yes"
    then
 AC_MSG_ERROR([Python is needed to compile NeL (www.python.org).]) AC_MSG_ERROR([Python is needed to compile NeL (www.python.org).])
    fi
 ) )
  
 CPPFLAGS="$_CPPFLAGS" CPPFLAGS="$_CPPFLAGS"
Line 207 
Line 365 
   DEBUG_OPTIMIZE_CC=""   DEBUG_OPTIMIZE_CC=""
   OPTIMIZE_CFLAGS="-O"   OPTIMIZE_CFLAGS="-O"
 fi fi
  
 if test "$ac_cv_prog_cxx_g" = "yes" if test "$ac_cv_prog_cxx_g" = "yes"
 then then
   DEBUG_CXXFLAGS="-g"   DEBUG_CXXFLAGS="-g"
Line 217 
Line 376 
   DEBUG_OPTIMIZE_CXX=""   DEBUG_OPTIMIZE_CXX=""
   OPTIMIZE_CXXFLAGS="-O"   OPTIMIZE_CXXFLAGS="-O"
 fi fi
  
 AC_ARG_WITH(debug, AC_ARG_WITH(debug,
     [  --with-debug[=full]     Build a debug version (huge libraries)     [  --with-debug[=full]     Build a debug version (huge libraries)
   --without-debug         Build withoug debugging code (default)],   --without-debug         Build without debugging code (default)],
     [with_debug=$withval],     [with_debug=$withval],
     [with_debug=no])     [with_debug=no])
  
 if test "$with_debug" = "yes" if test "$with_debug" = "yes"
 then then
   dnl Medium debug.   dnl Medium debug.
   CFLAGS="$DEBUG_CFLAGS $DEBUG_OPTIMIZE_CC $CFLAGS"   CFLAGS="$DEBUG_CFLAGS $DEBUG_OPTIMIZE_CC $CFLAGS"
   CXXFLAGS="$DEBUG_CXXFLAGS $DEBUG_OPTIMIZE_CXX $CXXFLAGS"   CXXFLAGS="$DEBUG_CXXFLAGS $DEBUG_OPTIMIZE_CXX $CXXFLAGS"
 elif test "$with_debug" = "full" else
      if test "$with_debug" = "full"
 then then
   dnl Full debug. Very slow in some cases   dnl Full debug. Very slow in some cases
   CFLAGS="$DEBUG_CFLAGS $CFLAGS"   CFLAGS="$DEBUG_CFLAGS $CFLAGS"
Line 237 
Line 399 
   CFLAGS="$OPTIMIZE_CFLAGS $CFLAGS"   CFLAGS="$OPTIMIZE_CFLAGS $CFLAGS"
   CXXFLAGS="$OPTIMIZE_CXXFLAGS $CXXFLAGS"   CXXFLAGS="$OPTIMIZE_CXXFLAGS $CXXFLAGS"
 fi fi
  fi
  
  
 dnl ==================================================================== dnl ====================================================================
Line 246 
Line 409 
 dnl STLPort dnl STLPort
 dnl ========== dnl ==========
  
 dnl Ask user for path to the STLport header/library files if test -z "$no_stlport"
 AC_ARG_WITH( stllib, then
     [ --with-stllib=<path>     path to the STLPort installation directory. 
                           e.g. /usr/local/lib/stlport], 
     [STLLIB_DIR=$with_stllib 
       AC_MSG_RESULT(using STLPort library located in $with_stllib.)] 
 ) 
  
 if test X"$STLLIB_DIR" != X;     if test X"$STLPORT_CFLAGS" != X
 then then
     LIBS="-L$STLLIB_DIR $LIBS"         CXXFLAGS="$STLPORT_CFLAGS $CXXFLAGS"
 fi fi
  
 LIBS="$LIBS -lstlport_gcc"     if test X"$STLPORT_LIB" != X
      then
          LIBS="$STLPORT_LIB $LIBS -lstlport_gcc"
      fi
  
 _CPPFLAGS="$CPPFLAGS" _CPPFLAGS="$CPPFLAGS"
 CPPFLAGS="$CXXFLAGS"     CPPFLAGS="$CXXFLAGS $STLPORT_CFLAGS"
  
 AC_MSG_CHECKING("for STLPort")     AC_MSG_CHECKING(for STLPort)
 AC_EGREP_CPP( yo_stlport, AC_EGREP_CPP( yo_stlport,
 [#include <algorithm> [#include <algorithm>
 #ifdef __SGI_STL_PORT #ifdef __SGI_STL_PORT
    yo_stlport    yo_stlport
 #endif], #endif],
 [AC_MSG_RESULT("yes")],     [ AC_MSG_RESULT(yes)],
 AC_MSG_ERROR([STLPort is needed to compile NeL (www.stlport.org).])       AC_MSG_ERROR([STLPort is needed to compile NeL (www.stlport.org).]) )
 ) 
  
 CPPFLAGS="$_CPPFLAGS" CPPFLAGS="$_CPPFLAGS"
  fi
  
 dnl ========== dnl ==========
 dnl FreeType 2 dnl FreeType 2
Line 284 
Line 444 
 dnl Check for the FreeType 2 library files dnl Check for the FreeType 2 library files
 AC_PATH_PROG(FREETYPE_CONFIG, freetype-config, no) AC_PATH_PROG(FREETYPE_CONFIG, freetype-config, no)
  
 if test "$FREETYPE_CONFIG" = "no"; then if test "$FREETYPE_CONFIG" = "no" -a "$enable_3d" = "yes"
  then
     AC_MSG_ERROR([Cannot find freetype-config: check your path.     AC_MSG_ERROR([Cannot find freetype-config: check your path.
     FreeType 2 library is needed to compile NeL (freetype.sourceforge.net).])     FreeType 2 library is needed to compile NeL (freetype.sourceforge.net).])
 else else
Line 299 
Line 460 
 _CPPFLAGS="$CPPFLAGS" _CPPFLAGS="$CPPFLAGS"
 CPPFLAGS="$CXXFLAGS ${FREETYPE_CFLAGS}" CPPFLAGS="$CXXFLAGS ${FREETYPE_CFLAGS}"
  
 AC_MSG_CHECKING("for FreeType 2 installation") AC_MSG_CHECKING(for FreeType 2 installation)
 AC_EGREP_CPP( yo_freetype2, AC_EGREP_CPP( yo_freetype2,
 [#include <freetype/freetype.h> [#include <freetype/freetype.h>
 #if FREETYPE_MAJOR == 2 #if FREETYPE_MAJOR == 2
    yo_freetype2    yo_freetype2
 #endif], #endif],
 [AC_MSG_RESULT("yes")], [ AC_MSG_RESULT(yes) ],
 AC_MSG_ERROR([Freetype 2 library is needed to compile NeL (www.stlport.org).])   if test "$enable_3d" = "yes"
    then
        AC_MSG_ERROR([Freetype 2 library is needed to compile NeL (freetype.sourceforge.net).])
    else
        AC_MSG_RESULT(no)
    fi
 ) )
  
 CPPFLAGS="$_CPPFLAGS" CPPFLAGS="$_CPPFLAGS"
Line 317 
Line 483 
 dnl ========== dnl ==========
  
 dnl Checking the OpenGL installation dnl Checking the OpenGL installation
 AC_MSG_CHECKING("for OpenGL installation") AC_MSG_CHECKING(for OpenGL)
 AC_EGREP_CPP( yo_opengl, AC_EGREP_CPP( yo_opengl,
 [#include <GL/gl.h> [#include <GL/gl.h>
 #if defined(GL_VERSION_1_2) #if defined(GL_VERSION_1_2)
    yo_opengl    yo_opengl
 #endif], #endif],
 [AC_MSG_RESULT("yes")], [ AC_MSG_RESULT(yes) ],
    AC_MSG_RESULT(no)
    if test "$enable_3d" = "yes"
    then
 AC_MSG_ERROR([OpenGL 1.2 is needed to compile NeL (www.mesa3d.org).]) AC_MSG_ERROR([OpenGL 1.2 is needed to compile NeL (www.mesa3d.org).])
    fi
 ) )
  
 dnl Checking the GLEXT version dnl Checking the GLEXT version
Line 336 
Line 506 
    yo_glext_version    yo_glext_version
 #endif #endif
 #endif], #endif],
 [AC_MSG_RESULT("yes")], [ AC_MSG_RESULT(ok) ],
    if test "$enable_3d" = "yes"
    then
       AC_MSG_RESULT(no)
 AC_MSG_ERROR([A newer version of <GL/glext.h> is needed to compile NeL (download it from http://oss.sgi.com/projects/ogl-sample/ABI/).]) AC_MSG_ERROR([A newer version of <GL/glext.h> is needed to compile NeL (download it from http://oss.sgi.com/projects/ogl-sample/ABI/).])
    fi
  )
  
  
  dnl ============================================
  dnl Check for XF86VidMode extension (-lXxf86vm)
  dnl ============================================
  AC_MSG_CHECKING("for XF86VidMode extension")
  AC_ARG_WITH( xf86vidmode,
      [  --with-xf86vidmode=<path>
                            path to the XF86VidMode lib.
                            e.g. /usr/X11R6/lib],
      [ VMLIB_DIR=$with_xf86vidmode
        AC_MSG_RESULT(using VidMode library located in $with_xf86vidmode.)],
        AC_MSG_RESULT(Compiling without Xf86VidMode and hence fullscreen support to compile with XF86VidMode support, use --with-xf86vidmode=<pathtolib>)
  )
  
  if test X"$VMLIB_DIR" != X;
  then
      LIBS="-L$VMLIB_DIR -lXxf86vm $LIBS";
      CXXFLAGS="$CXXFLAGS -DXF86VIDMODE";
  fi
  
  
  dnl ==========
  dnl OpenAL
  dnl ==========
  
  if test X"$OPENAL_CFLAGS" != X
  then
     CXXFLAGS="-I$OPENAL_CFLAGS $CXXFLAGS"
  fi
  
  if test X"$OPENAL_LIB" != X
  then
      LIBS="-L$OPENAL_LIB $LIBS -lstlport_gcc"
  fi
  
  AC_SUBST(OPENAL_CFLAGS)
  AC_SUBST(OPENAL_LIBS)
  
  _CPPFLAGS="$CPPFLAGS"
  CPPFLAGS="$CXXFLAGS $OPENAL_CFLAGS"
  
  AC_MSG_CHECKING(for OpenAL)
  AC_EGREP_CPP( yo_openal,
  [#include <AL/altypes.h>
  #ifdef AL_VERSION
     yo_openal
  #endif],
  [ AC_MSG_RESULT(yes)],
    AC_MSG_RESULT(no)
    if test "$enable_sound" = "yes"
    then
        AC_MSG_ERROR([OpenAL is needed to compile NeL (www.openal.org).])
    fi
 ) )
  
  CPPFLAGS="$_CPPFLAGS"
  
  
 dnl ==================================================================== dnl ====================================================================
 dnl Checks for library functions. dnl Checks for library functions.
Line 355 
Line 586 
  
 AC_OUTPUT( Makefile                       \ AC_OUTPUT( Makefile                       \
            include/Makefile               \            include/Makefile               \
             include/nel/Makefile              \
             include/nel/misc/Makefile         \
             include/nel/net/Makefile          \
             include/nel/3d/Makefile           \
             include/nel/pacs/Makefile         \
             include/nel/sound/Makefile        \
             include/nel/ai/Makefile           \
             include/nel/ai/agent/Makefile     \
             include/nel/ai/c/Makefile         \
             include/nel/ai/character/Makefile \
             include/nel/ai/e/Makefile         \
             include/nel/ai/fuzzy/Makefile     \
             include/nel/ai/logic/Makefile     \
             include/nel/ai/nimat/Makefile     \
             include/nel/ai/pyserver/Makefile  \
             include/nel/ai/script/Makefile    \
             include/nel/ai/tools/Makefile     \
            src/Makefile                   \            src/Makefile                   \
            src/misc/Makefile              \            src/misc/Makefile              \
            src/misc/config_file/Makefile  \            src/misc/config_file/Makefile  \
Line 362 
Line 610 
            src/3d/Makefile                \            src/3d/Makefile                \
            src/3d/driver/Makefile         \            src/3d/driver/Makefile         \
            src/3d/driver/opengl/Makefile  \            src/3d/driver/opengl/Makefile  \
             src/pacs/Makefile                 \
             src/sound/Makefile                \
             src/sound/driver/Makefile         \
             src/sound/driver/openal/Makefile  \
            src/ai/Makefile                \            src/ai/Makefile                \
            src/ai/agent/Makefile          \            src/ai/agent/Makefile          \
            src/ai/c/Makefile              \            src/ai/c/Makefile              \
Line 372 
Line 624 
            src/ai/pyserver/Makefile       \            src/ai/pyserver/Makefile       \
            src/ai/script/Makefile         \            src/ai/script/Makefile         \
            src/ai/tools/Makefile          \            src/ai/tools/Makefile          \
             nel-config                        \
  )
  
  
 dnl End of configure.in dnl End of configure.in

Legend:
Removed from v.1.32 
changed lines
 Added in v.1.48